Table of Contents
Advertisement
Special accessories
MAZ8BI
Stainless steel pan, polished, with a non-
stick coating and storage lid*; suitable
for the induction multi-cooker with steam
pressure function MUC88...
MAZ0FB
Frying basket
*The storage lid is not supplied as standard with the appliance. It is only supplied with pans as a special
accessory. If an accessory is not included in the product package, it can be purchased via trade stockists or
customer service.
Troubleshooting
Problem
The prepared meal is
half-raw.
The prepared meal is burnt.
The appliance boils over.
LED does not light up.
The hotplate does not
function.
Water is flowing out of the
appliance.
Cause
Filled beyond capacity.
The ratio of the amount of water and
the ingredients is incorrect.
Foreign objects in the appliance
interior.
The pan is deformed.
Fault in the appliance.
Fault in the sensor.
There is dirt underneath the pan.
The pan is deformed.
Fault in the appliance.
Fault in the sensor.
Filled beyond capacity.
The temperature is too high.
The selected preparation
programme requires the meal to be
cooked with the lid open.
The appliance is switched off.
Fault in the power cord.
Fault in the appliance.
The hotplate is damaged.
The appliance features overflow
protection.
The condensation tank is full and
overflowing.
Special accessories
5-litre pan; dishwasher-safe; very robust pan; 3
mm thick; stainless steel polished exterior; non-
stick coating; lid* for the practical storage of food
in the pan, e.g. in the refrigerator
Stainless steel basket with removable handle for
easy handling; dishwasher-safe
Remedy
Do not fill the pan beyond the marking
[ 4.0 litres ]!
Adjust the ratio of the amount of water and
the ingredients.
Remove all foreign objects. Do not use
any water for this purpose!
Contact customer service.
Thoroughly clean the pan and the
appliance interior.
Contact customer service.
Adjust the amount.
Reduce the temperature.
Open the lid of the appliance.
Switch on the appliance.
Contact customer service.
Contact customer service.
Remove water from condensation tank.
Remove the pan and use a cloth to rub
the appliance interior dry. Ensure that no
water enters the appliance interior.
en
51
Advertisement
Chapters
Table of Contents
