Switch Mode - ShanWan Q11A User Manual

SWITCH Mode:

On the switch host, select Controllers Controllers
interface press L + R on the controller.
At the same time, press RT +
LED4 flash.
If the pairing is successful, the LED2 green light and LED4 green light are on for a long time. After successful
connection, you can press directly
Green light
LED2
SEL
Connect the controller directly to the PS3/PS4 host with the type-C USB cable, and press to conduct code
matching.The
time.
It has been successfully connected. You can press it directly
connect back automatically.
Wired mode:
Each system platform is automatically identified in wired mode. The supported system platforms include Android,
PC (D-input and X-input), PS3 and switch.
1. On the PC, press
2. After the wired mode is successfully connected, the LED on the right turns green.
2 seconds to enter the switch mode for pairing. The controller LED2 and
Green light
LED4
code matching is successful, and the LED1 blue light and LED3 blue light are on for a long
2 seconds to switch between D-input and X-input.
change grip / order to enter the switch host pairing mode
, LED2 and LED4 lights flash slowly and connect automatically.
Y
X B
A
STA
controller
controller
controller
SEL
. LED1 and LED3 lights flash slowly and
Change grip / order
Search controller
Matching method of new handle
Y
X B
A
close
STA