dish 20.0 & 20.1 Remote Control Manual

Turn On Your Remote

1. Remove the PULL tab on the back of your remote control
   
2. Press SYSTEM INFO on your receiver
   
   The appearance and location of the SYSTEM INFO button varies from receiver to receiver
   This button is located behind a door on the front of some receivers
3. Press SAT and then RECORD on your remote
   
4. Select Done on the screen
   

Pair Your Remote

1. Press and hold the device button you want to program until all four device buttons light up
   
   Press and hold
   • TV to pair with your TV
   • DVD or AUX to pair with any other device
2. Enter the three-digit code for your device while the device buttons are lit up
   
   See Device Codes in this guide
3. Press #
   
   The device button you selected will flash three times
4. Press the device power button
   
   Your device will turn on or off
   Ensure you are within ten feet of your device, pointing the remote control directly at it

If your device does not turn off or on, return to step 1, trying a different code for the manufacturer of your device

Explore Your Remote

1. Device Power
   Turn your DISH receiver– or another device you are controlling–on or off
2. Device Buttons
   Change the device you want to control: SAT (your DISH receiver), TV, Blu-ray/DVD player, or auxiliary device
3. Input
   Change your TV's input when in TV mode
4. Menu
   Access your receiver's features and settings
5. Page Up & Down
   Page through menus such as the Guide
6. TV Power
   Turn your TV on or off
7. Recall
   Return to the last channel you were watching
8. Cancel
   Go back one menu
9. Info
   Get more information about the program you're watching or one you've highlighted
10. View Live TV
    Return to the program you are watching
11. Search
    Find your favorite TV shows, movies, and sports
12. DVR
    Access your recorded TV shows and movies
13. Colored Buttons
    Access options and features available on the current menu
14. Playback Control
    While watching TV, use these buttons to pause, rewind, fast-forward, record, and more
15. DISH
    Go to the DishHOME interactive TV app
16. Picture in Picture (PiP)
    Control PiP windows and their orientations

Device Codes

Popular Manufacturer Codes

If your device's code isn't listed, visit mydish.com/remote-codes

If you're pairing an AUX device, precede the three-digit code with

• 0 for a TV (enter 0500 for code 500)
• 1 for a DVD or Blu-ray player
• 2 for any other device

Regulatory Information

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,

and

2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by following one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this device may void your authority to operate this equipment.

Safety Instructions

You must keep safety in mind while using this device. Keep these and any other instructions for future reference.

Observe Warnings: Carefully follow all warnings on the device and in the operating instructions.

Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat.

Case and Use

Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.

When Not in Use: Remove the batteries if this device is to be left unattended or unused for a long period of time.

This product can expose you to Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Refer servicing to qualified personnel when a solid object or liquid has fallen onto or into the device.

Do NOT attempt to service this device. Refer all servicing to qualified personnel. Opening covers other than the battery cover will void the warranty.

Need Help?

mydish.com/support/products/remotes/20x

1.800.333.DISH (3474)

Warranty, safety, regulatory, and legal information can be found at mydish.com/support/remotes

DN011584