onn 32" 2.0 Soundbar Quick Start Guide

What's in the Box

Check to make sure you have everything below.

1. Soundbar
   
2. Remote control
   
3. AAA batteries
   
4. Power cable
   
5. HDMI cable
   
6. Wall mounting kit
   
7. Wall mounting template
   
8. Quick Start Guide
   

Get to Know Your 32" 2.0 Soundbar

Front

Back

Controls

1. Status indicator
   • Red: Standby mode
   • Green: Optical source
   • White: Aux in source
   • Blue: Bluetooth mode
   • Yellow: HDMI mode
   • Purple: USB Source
2. Wall mount
3. HDMI(ARC)
4. Aux in
5. USB
6. Optical
7. Power
8. Power on / off
9. Source
10. Volume up
11. Volume down

Adjust TV settings

	OR
Have a Roku TV?		All other TVs
Simply use the remote that came with your Roku TV and follow next steps. The rest is automatic, even linking your Roku account.		You may need to enable your TV's HDMI-CEC and ARC settings.

Connect to power

Use the included power cable to connect your 32" 2.0 Soundbar to a wall outlet.

TIP:
Place your 32" 2.0 Soundbar at the front edge of your TV stand for the best sound experience.

Connect to Your TV

Connect your 32" 2.0 Soundbar to the HDMI® port on your TV labeled "ARC" with the included cable.

Don't see an HDMI-ARC port?
Use the included optical cable along with the HDMI Cable to connect.

Select input

Use the remote that came with your TV to select the HDMI® input (source) you used to connect your 32" 2.0 Soundbar.

Insert batteries

*For remote control, Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

Follow on-screen setup

Follow the instructions on your TV screen to set up your 32" 2.0 Soundbar.

Other Connections

*If your TV without HDMI ARC jack, you can also connect your TV with soundbar by other connections (Optical, Bluetooth, Aux or USB).

Troubleshooting

If you have a problem, check the following table for tips:

• When you switch to another channel, the Bluetooth is disconnected.
• When the LED indicator is flashing, the Bluetooth is in disconnected status.
• When the LED indicator is solid, the Bluetooth is connected
• The Soundbar will automatically switch to standby mode when no audio input is received for over 20 minutes, and wake up automatically with any source input again.

If the unit doesn't function correctly, unplug it, wait 30 seconds, and plug it back in.

June 02, 2021_V1