HolyHigh ET1 Wireless Headphones Manual

HolyHigh ET1 Wireless Headphones Manual

Advertisement

HolyHigh ET1 Wireless Headphones Manual

What's in the Box

Wireless Earphones
2 x Wireless Earphones

Charging Case
1 x Charging Case

USB Cable
1 x USB Cable
Ear Caps

3 x Pairs of Ear Caps (S/M/L)


1 x User Manual

Product Overview

Product Overview Step 1


Product Overview Step 2


Product Overview Step 3

User Guides

  1. Please tear off the insulating films attached theearphones and fully charge them before first use.
  2. How to Pair

(1) Binaural Mode
① Take out the earphones or press and hold themulti-function buttons(MFB) for 2 seconds to turn them on.
② Once paired automatically, the LED indicator of themaster earphone will flash red and blue alternatively; the indicator of the slave earphone will be off. A voice prompt will say "Pairing".
③ Select "ET1" on your phone to connect from theBluetooth list. Once connected, the indicators will be off. A voice prompt will say "Connected".
(2) Mono Mode
① Take out a single earphone or press and hold theMFB for 2 seconds to turn it on.
② Double-click the MFB, a voice prompt will say"Pairing"; the indicator will flash red and blue alternatively.
③ Select "ET1" on your phone to connect from theBluetooth list. Once connected, a voice prompt will say "Connected".
(3) Mode Switch
① To switch to mono mode during the binaural mode, simply put either the right or left earphone into the charging case.
② To switch to binaural mode during the mono mode, simply open the charging case or take out the other earphone.

  1. How to Reset

① Delete "ET1" in the Bluetooth list and turn off theBluetooth function of your phone.
② Turn off the earphones, press and hold the MFB for10 seconds; the indicator will flash red and blue for 3 times at the same time.
③ Put the earphones into the charging case and closethe lid; now the reset is done.
④ If it fails, repeat the above three steps.

How to Control

Music & Calls Control
Turn on Take out from the case/press and hold the L/R MFB for 2s
Turn off Put into the case/press and hold for 5s( in standby mode)
Play/pause Click L/R
Previous/next Double-click L/R
Volume -/+ Press and hold for 2s; keep pressing to turn down/up continuously (in the binaural mode)
Answer/hang up a call Click L/R
Reject a call Press and hold for 2s
Answer the second call and keep the first call Click L/R
Reject the second call during the first call Press an hold for 2s
Switch between two calls Click L/R
Answer the second call and hang up the first call Double-click L/R
Hang up the second call and switch to the first call Double-click L/R
Turn on/off voice assistant Triple-click L/R

Specifications

Support File HFP, HSP,A2DP, AVRCP
Work Range 10 meters(Barrier-free)
Playtime Up to 5 hours (Varies by volume level and audio contents)
Single Earphone Battery 40mAh
Charging Case Battery 600mAh
Charging Times 6times
Input Current 5V/1A

EU Conformity Statement


This product and - if applicable - the supplied accessories too are marked with"CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.


Manual Download


Q & A


Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co located or operating in conjunction with any other antenna or transmitter.

Videos

HolyHigh ET1 - Unboxing Video & First Impressions

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download HolyHigh ET1 Wireless Headphones Manual

Advertisement

Need help?

Need help?

Do you have a question about the ET1 and is the answer not in the manual?

Questions and answers

Table of Contents