PROSCAN Smart Watch PBTW274 Manual

PROSCAN Smart Watch PBTW274 Manual

Advertisement

PROSCAN Smart Watch PBTW274 Manual

This product is manufactured and sold by Curtis International Ltd.
PROSCAN is a registered trademarks of Technicolor USA used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by Technicolor USA or its affiliates.

Safety Warning

The information in this document will not be modified or extended in accordance with any notice.
The watch should be charged for at least 2 hours prior to initial use.

Security code

The original code is 1122. This code can prevent your watch from being used by others without your permission. Please change the original code to ensure that your personal information is safe.

Product details

Product overview

Product overview

Power button: Long press to power on/off; Short press to awake/darken the screen.
Micro USB port: for charging use only.
Touch screen: Each function in the main menu will be shown and displayed on the capacitive touch screen, you can enter into the next page by sliding your finger on the screen to the left, and return to last page by sliding your finger on the screen to the right.

Clock Setting method

Clock Setting method
While the phone is in clock mode, touch in the middle of the screen to select the clock display that you prefer, there are three options.

Product quick use

Download the Sync software

Scan below QR code to download the APP(only for android phone), and sync your phone. Always update the Sync software as updates become available. Be sure to sign into your account in before downloading, allow app notification must be turned on.

Install and use the Sync software

Android Application installation:
Please install the android application in your smart phone, enter into Bluetooth mode, the application runs on the background automatically, choose the Notification service, select your personal or system application in Notify application, telephone service is including SMS, incoming call and seek watch.
Notice:
Please do not shut off the Bluetooth notify service when you are clearing the software background or close background application software. It will affect the sync function between the watch & phone if it is shut off.

Bluetooth Connection and Sync function

From phone to watch

Phone setting: turn on the Bluetooth function and search for devices, smart watch bluetooth name is PBTW274, click "pair devices", choose "yes", pairing is completed.

From watch to phone

Click the BT icon from the smart watch ---Click the Power to switch on---Search new device----found your Bluetooth device on the watch list----tap to pair it.

Basic functions

Message

Sync phones or watch messages

Bluetooth

Sets the Bluetooth status, turn on/off.

Calls records

You can check your phone records after you connect with via Bluetooth, it will show all records including missed calls, dialed calls and received calls, you can check the date, time and phone number of the miss call after you choose it.

BT dialer

After connect Bluetooth, can make phone call from paired devices from smart watch.

Remote notifier (Only for Android users)

When there is SMS, incoming message from QQ and other applications on the connected phone, the watch phone will alert you to read them.

Remote camera

Smart watch camera can control smart phone camera.

Anti lost

Watch seek phone, or phone seek watch.

Setting

Notice: Sets clocks display and theme in phone setting, in the security setting, the safe code is 1122.

Pedometer

It can be adopted as a tool to avoid insufficient or excessive exercise by measuring calories consumption based on the collected data, such as number of steps, distance, speed, time etc.
If you want to return to main menu but keep pedometer during the exercise, press the power button.

Sleep monitor

Shows your sleep quality based on your sleep time.

Sedentary remind

You can set a time to remind you to do some exercise.

Alarm

You can set alarm.

Calendar

You can check calendar.

Calculator

You can do calculations.

Audio player

Can play music from local or smart phone after connected with Bluetooth.

Camera

Insert Micro SD card can take pictures and save in Micro SD card.

Pictures

Can check pictures.

Recorder

Can make recordings.

Browser

Browser need your phone has SIM Card and can surf the Internet.

Notice

Main menu: theme setting, choose the theme if you like.

  1. Fully charge before initial use: average charge time is 1-2 hours.
  2. Use the accessories cable to charge.
  3. Bluetooth will disconnect when exceed the distance, after switch on the Anti lost, the smart search function can't be used before reconnecting with Bluetooth.
  4. Reconnect with BT if it is disconnected (please reconnect if the Bluetooth is disconnected over 5 minutes), please agree the phone book sync otherwise there is no called phone book.

Common troubleshooting

Please refer below for the key functions for any problems with the watch.

Unable to switch on

The time of pressing the power button was too short, please press for more than 3 seconds.

Shut down automatically

Low power: charge it.

Using time too short

Battery is not full, please make sure it is full power (full charge needs 2 hours of charge time. During the use of the SIM card, the power will turn off if the signal is weak.

Unable to charge

The battery life will be reduced after few years, please confirm that the battery is operational. Change a new charger if it is unworkable. Please confirm that the USB Slot connection is good.

No caller's name when incoming call

Forgot to upload the phone book when connected with BT, or unselected keep upload the phone book. Forget to sync the phone book when reconnected, please pair the device and connect BT again.

Bad phone call voice

Distance between Watch and phone is too far.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2ATSTXG

For service assistance and product information, please call:
1-800-968-9853. Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15. MISSISSAUGA. ON,
L5S2A3 www.curtisint.com

To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call 1-800-968-9853.

90 days Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.

Brand

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download PROSCAN Smart Watch PBTW274 Manual

Advertisement

Need help?

Need help?

Do you have a question about the PBTW274 and is the answer not in the manual?

Questions and answers

Table of Contents