Page 3
ONEUP will not assume any legal responsibility. DO NOT use the product with incompatible components or alter the product in any way without following the instructions provided by ONEUP.
1. Specifications General Info Net Weight Approximately 48lbs Dimensions 19.6x9.5x12in Capacity 1612Wh 50.4V Output Ports Pure Sine Wave, 2000W total (surge 5000W), AC (x6) 120V~ 60Hz Max Device(s) Power Supported by Smart 2800W Inverter Mode 2.4A 12W Max, per port USB-A (x2) 2.4A 9V 2A 12V...
6. Do not use unofficial components or accessories. If you need to replace any components or accessories, please visit official ONEUP channels to check relevant information. 7. When using the product, please strictly follow the operating environment temperature specified in this user manual.
3. Getting Started 3.1 Product Details LCD Screen USB-A Fast Charge USB-A Output Port Output Port USB-C 100W Output Port USB Power Button Main Power Button AC Charge Speed Switch AC Charging Input Port Solar/Car Charging Overload Protection Switch Input Port AC Output Sockets AC Power Button Car Outlet...
3.2 LCD Screen Remaining Battery Percentage Battery Failure Warning High Temperature Warning Battery Level Indicator Low Temperature Warning Fan Indicator Input Power Remaining Charge/ Output Power Discharge Time Overload Warning State of Charge USB-A Output AC Output USB-C Output 12V DC Output Indicator Battery Level Indicator: The indicator will repeatedly fill while charging.
Page 9
USB Output Port With the Main Power Button turned on, short press the USB Power Button to use the USB Output Port. Short press the USB Power Button again to turn it off. With the USB Power Button on, the product will not automatically shut down.
The charging power can be adjusted through the AC Charge Speed Switch on the back of the product. Please use ONEUP AC charging Cable for fast charging. AC Charging Cable should directly plug into 15A(or above) wall outlet. ONEUP takes no responsibilities for any consequences caused by failures to follow instructions, including...
100V DC input, 10A Max current, and 800W Max charging power. Solar Charging Cable When using an ONEUP solar panel to charge the product, please follow the instructions that come with the solar panel. Before connecting the solar panel, please ensure that the solar panel’s output voltage is with in 100V to avoid product damages.
Please test and confirm the compatibility before using the product. We recommend that you only charge one device at a time and avoid using multiple ones at the same time to avoid overload protection. ONEUP takes no responsibilities for any device failures or data losses caused by failures to follow instructions.
4. FAQS 1. What battery does the product use? It uses high-quality lithium-ion battery. 2. What devices can the product’s AC output port power? With high rated power and peak power, the product’s AC output port can power most household appliances. Before you use it, we recommend that you confirm the power of the appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a restart, please stop using it immediately (do not try to charge or discharge). If you require any other assitance, please contact ONEUP Customer Service.
7. What’s In the Box ONEUP 1600 AC Charging Cable Car Charging Cable Solar Charging Cable DC5521 to DC5525 Cable User Manual & Warranty Card 8. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the 1600 and is the answer not in the manual?
Questions and answers