SOOCOO S100Pro User Manual page 18

Loop Recording can be set for 3/5/10 minutes, every video time is as long
as how it sets. When memory card is full, the first video is covered to keep
recording.
6. Motion Detection
Select Motion Detection ON, then switch to video standby, camera starts
video when something moves in front of camera. Camera stops video if no
motion detected in 10 seconds, and keeps monitoring, Camera moves in
cycle.
Press OK button to stop video and stop monitor to enter video standby
status. Switch setting menu to turn on Motion Detection function to restore
normal video setting.
Note: Time-lapse and Motion Detection can not be initiated at the same
time.
7.Capture
Press Power button to capture an image during video, photo symbol
flashes in the top middle of screen. Video keeps recording when capture.
Review under the playback mode.
8. Setting Menu of Video Mode:
Screen displays current system setting and all functions activated. Click
setting symbol to enter menu setting, specific as follows:
1) Resolution: UHD 24FPS / QHD 30FPS / FHD 60FPS / FHD 30FPS / HD
120FPS / HD 60FPS / HD 30FPS / WVGA 30FPS / VGA 240FPS / VGA
30FPS / QVGA 30FPS
2) Time lapse: Off / 100ms / 200ms / 500ms / 1 Second / 5 Seconds
17