Table of Contents
Advertisement
3. DETERGENT DRAWER
The
detergent
draw
compartments as illustrated in figure 9:
compartment "1": for prewash detergent;
compartment "
softeners, starch fragrances, etc.;
WARNING:
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last
rinse.
compartment
detergent.
is
split
into
": for special additives,
"2":
for
washing
WARNING:
3
some detergents are not designed for
use in the dispenser drawer but are
supplied with their own dispenser that
is placed in the drum directly.
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the H-WASH 300 PRO and is the answer not in the manual?
Questions and answers
What is the rapid care button. 14,30,44 ?
The Rapid Care button on the Hoover H-WASH 300 PRO allows the selection of a rapid washing program when the RAPID CARE program is chosen on the knob.
This answer is automatically generated
I dont think there is any detergent coming out of the drawer despite the compartment being topped up when i first got it, about three weeks ago. Clothes are coming out, but dont have that distinctive smell of Fairy?
There are several possible reasons why no detergent is coming out of the drawer in your Hoover H-Wash 300 Pro:
1. Blocked Detergent Drawer – Detergent residue may have built up in the drawer, preventing proper flow. Clean the drawer regularly with a microfibre cloth and avoid using acidic or aggressive cleaning products.
2. Clogged Dispenser Nozzle – The internal parts of the dispenser may be blocked by detergent residue or limescale. Running an empty wash cycle at 90 degrees once a month and using a washing machine cleaner every few months can help prevent build-up.
3. Low Water Pressure – If the water pressure is too low, it may not be flushing the detergent properly. Check your household water supply.
4. Pump Filter Issues – A clogged pump filter might affect water flow. The filter should be cleaned 5–6 times a year to prevent drainage problems.
5. Installation Issues – If the washing machine is not installed correctly, water may not be reaching the detergent drawer properly. Ensure proper installation and check for kinks in the water supply hose.
Cleaning the detergent drawer and ensuring proper maintenance should resolve most issues.
This answer is automatically generated
@Mr. Anderson thank you. My washer is less than four weeks old. I have had the drawer out, the two ‘exits’ for the washing liquid and the conditioner are clear. I did put a little extra liquid in the front of the draw, that powders normally go into, and I found the clothes came out smelling slightly of the Fairy washing liquid. I never have seen any ‘sudsy’ water in the drum, when I’m using the washer. Should I not expect that with the ‘A’ rating of the machine? Many thanks.
I press the start button but the machines ne does not stary
Sorry I meant I pressed the start button but the washing machine does not start