Marantz CD5005 Service Manual
  1. Manuals
  2. Brands
  3. Marantz Manuals
  4. CD Player
  5. CD5005
  6. Service manual

Marantz CD5005 Service Manual

Hide thumbs Also See for CD5005:
Table of Contents

Advertisement

Quick Links

Service
Manual
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
S1354-1V03DM/DG1610
CD5005
Copyright 2014 D&M Holdings Inc. All rights reserved.
WARNING: Violators will be prosecuted to the maximum extent possible.
CD5005 /
N1B/N1SG/U1B/K1B/K1SG
/FN
CD Player
Ver. 3
Please refer to the
MODIFICATION NOTICE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD5005 and is the answer not in the manual?

Questions and answers

Related Manuals for Marantz CD5005

Summary of Contents for Marantz CD5005

  • Page 1 Service CD5005 / N1B/N1SG/U1B/K1B/K1SG Manual CD Player • For purposes of improvement, specifications and design are subject to change without notice. • Please use this service manual with referring to the operating instructions without fail. • Some illustrations using in this service manual are slightly different from the actual set.

  • Page 2: Table Of Contents

    Contents ABOUT THIS MANUAL .............3 What you can do with this manual ..........3 Using Adobe Reader (Windows version) ........4 SAFETY PRECAUTIONS ............6 NOTE FOR SCHEMATIC DIAGRAM .........7 NOTE FOR PARTS LIST ............7 TECHNICAL SPECIFICATIONS ..........9 DIMENSION ................9 Precautions During Service...........10 Initializing This Unit ..............10 Service Jigs ................10 Note Handling and Replacement of the Laser pick-up ..11...

  • Page 3: About This Manual

    ABOUT THIS MANUAL Read the following information before using the service manual. What you can do with this manual Search for a Ref. No. (phrase) Jump to the target of a schematic diagram connector (Ctrl+Shift+F) You can use the search function in Acrobat Reader to search for a Ref.

  • Page 4: Using Adobe Reader (Windows Version)

    Using Adobe Reader (Windows version) Add notes to this data (Sign) Magnify schematic / printed wiring board diagrams - 1 TheSignfunctionletsyouaddnotestothedatain (Ctrl+Space, mouse operation) this manual. Savethefileonceyouhavefinishedaddingnotes. Press Ctrl+Spaceonthekeyboardanddragthe [Example using Adobe Reader X] mousetoselecttheareayouwanttoview. On the "View" menu, click "Sign". • Theselectedareaismagnified.
  • Page 5 Magnify schematic / printed wiring Magnify schematic / printed wiring board diagrams - 2 board diagrams - 3 (Pan & Zoom function) (Loupe Tool function) ThePan&Zoomfunctionletsyouseewhichpartof TheLoupeToolfunctionletsyoumagnifyaspecific amagnifieddiagramisbeingshowninaseparate part of a diagram in a separate window. window. [Example using Adobe Reader X] On the "View"...

  • Page 6: Safety Precautions

    SAFETY PRECAUTIONS The following items should be checked for continued protection of the customer and the service technician. leakage current check Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set is defective.

  • Page 7: Note For Schematic Diagram

    NOTE FOR SCHEMATIC DIAGRAM WARNING: Partsindicatedbythe z markhavecriticalcharacteristics.UseONLYreplacementpartsrecommendedbythemanufacturer. CAUTION: Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassisresistancecheck.If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set is defective. WARNING: DONOTreturnthesettothecustomerunlesstheproblemisidentifiedandremedied. NOTICE: ALLRESISTANCEVALUESINOHM.k=1,000OHM/M=1,000,000OHM ALLCAPACITANCEVALUESAREEXPRESSEDINMICROFARAD,UNLESSOTHERWISEINDICATED.PINDICATESMICRO-MICRO...
  • Page 8 WARNING AND LASER SAFETY INSTRUCTIONS WARNING WAARSCHUWING Alle IC’s en vele andere halfgeleiders zijn gevoelig All ICs and many other semi-conductors are voor elektrostatische ontladingen (ESD). susceptible to electrostatic discharges (ESD). Onzorgvuldig behandelen tijdens reparatie kan de Careless handling during repair can reduce life levensduur drastisch doen verminderen.

  • Page 9: Technical Specifications

    TECHNICAL SPECIFICATIONS n Audio performance • Analog output Channels ： 2Channels Playable frequency range ： 2Hz～20kHz Playable frequency response ： 2Hz – 20kHz (±0.5 dB) S/N: 110 dB Dynamic range: 100 dB Harmonic distortion ： 0.002% （1kHz） Wow & flutter ： Crystal accuracy •...

  • Page 10: Precautions During Service

    PRECAUTIONS DURING SERVICE Initializing This Unit Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the CD PCB. Disconnect the AC plug of this unit to turn the power off. Press the "PAUSE" and "OPEN/CLOSE" buttons simultaneously while inserting the AC plug to turn the power on. "INITIALIZING"...

  • Page 11: Note Handling And Replacement Of The Laser Pick-Up

    NOTE HANDLING AND REPLACEMENT OF THE LASER PICK-UP 1. Protection of the LD Short a part of the LD circuit by soldering. After connection to a circuit, remove the short solder. 2. Precautions when handling the laser CD mechanism • Handle the laser pick-up so that it is not exposed to dust.

  • Page 12: Disassembly

    DISASSEMBLY • Remove each part in the order of the arrows below. • Reassemble removed parts in the reverse order. • Read "Precautions During Work" before reassembling removed parts. • If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work.
  • Page 13 1. FRONT PANEL ASSY → Proceeding : CABINET TOP FRONT PANEL ASSY (1) Remove the loader panel. Shooting direction B (2) Remove the screws. (3) Remove the connector wires and FFC. Remove the screws. CN3301 FFC Cable See "EXPLODED VIEW" for instructions on how to remove each PCB of the FRONT PANEL ASSY.
  • Page 14 2. MAIN PCB → Proceeding : CABINET TOP MAIN PCB (1) Remove the screws. Shooting direction A (2) Remove the screws. Remove the connector wires and FFC. MAIN PCB CN2801 CN3101 CN2101 CN44 Shooting direction B FFC Cable CWC100 CWC101...
  • Page 15 3. POWER PCB → Proceeding : CABINET TOP POWER PCB (1) Remove the screw. Shooting direction A (2) Remove the screws. Remove the connector wires and FFC. CN902 CN901 CN3902 CN3901 カッ ト BN3504 BN2801 POWER PCB...
  • Page 16 4. AUDIO PCB → Proceeding : CABINET TOP AUDIO PCB (1) Remove the screws. Shooting direction A (2) Remove the connector wires and FFC, remove the screws. CN3301 AUDIO PCB BN2101 BN3101 CN3504...
  • Page 17 5. MECHA ASSY → → Proceeding : CABINET TOP Loader Panel MECHA ASSY (1) Remove the screws. MECHA ASSY (2) Laser short-circuit in Pick-up of CD MECHANISM ASS'Y, then disconnect the connector wires and FFC cable. Be sure to wear a grounding band. Short (3) Disconnect the connector wire and FFC.

  • Page 18: Removing Discs

    REMOVING DISCS (1) Put in a groove on the bottom, the pattern of tweezers. Press to slide in the direction of the red arrow. (2) DOOR opens a little, pull it out by hand.

  • Page 19: Special Mode

    SPECIAL MODE Special Mode Configuration Buttons b No.1 - 8 : Turn on the AC plug while pressing the button of A and B at the same time. Mode Button A Button B Contents Version display mode OPEN/CLOSE PLAY Firmware versions such as Main are displayed in the FL. VFD check mode OPEN/CLOSE STOP...

  • Page 20: Version Display Mode

    1. Version display mode Turn on the AC plug while pressing the button of "OPEN/CLOSE" and " ". Now, press the " " or " " button, following information is displayed on the FL tube. 8 / 6 7 / 9 Display Order Version of System μ-com →...

  • Page 21: Cd Test Mode

    4. CD test mode Turn on the AC plug while pressing the button of " " and " ". 8 / 6 To exit, turn off. : Blink Detail of the CD test mode Mode Button / Operation Disc loading Servo check LD ON FOCUS ON...
  • Page 22 4.2. Servo check • Press the " 1 " button. Execute the following steps. (1) LD ON (with servo still stopped) (2) FOCUS ON (disc rotation, tracking off) If no disc loaded, retry then stop. (3) CLV ON (4) TRACKING ON (5) SUB CODE readout (playback sound output) : Blink z @@ : T.No...
  • Page 23 4.6. Adjustment value display • When the " 2 " button is pressed, the adjustment values are displayed. (After All Servo on) • Press the " " button is pressed, the adjustment value are displayed int the following order. 7 / 9 (1) FOCUS BALANCE X X X X (2) FOCUS GAIN...

  • Page 24: Cd Heart Run Mode

    5. CD heart run mode • Set the disc in the tray. Turn on the AC plug while pressing the button of " " and " 2 ". 8 / 6 • If an error occurs, display the error and stop operation at that point. Number of operations held. See "Error display". Heat run count cleared when "...
  • Page 25 5.3. Error display E1-00 : Disc cannot be detected E1-01 : Tracking offset adjustment not possible E1-02 : Focus offset adjustment not possible E2-00 : Focus servo dropped during playback E2-01 : Focus servo dropped during searching E2-03 : Focus servo dropped during TOC reading E2-06 : Focus servo dropped during manualsearch E2-10 : Subcode can no longer be read during playback E2-11 : Subcode can no longer be read during searching...

  • Page 26: Laser On Time

    6. Laser on time Turn on the AC plag while pressing the " " and " 3 " button on this unit. 8 / 6 • One count corresponds to 10 minutes. (Values under 10 minutes are discarded.) • When the time exceeds 10922 hours, the stored data is not updated and the value is fixed 10922. Initialization of a count value •...

  • Page 27: About Replace The Microprocessor Witha New One

    ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE When replaced of the U-PRO (Microprocessor) or the Flash ROM, confirm contents of the following. After PWB Name Ref. No. Description Remark replaced IC302 SOFTWARE:Main TMPM330FYFG After replaced A : Mask ROM (With software). No need write-in of software to the microprocessor. B : Flash ROM (With software).

  • Page 28: Update For Ic302(Tmpm330Fyfg)

    1. Update for IC302(TMPM330FYFG) (1) Connection of SPK-581, PC and the unit. See "Connect SPK-581 Page)" (2) Double click BootTool_M330, and launch the Boot Tool_M330. (3) Choose the Serial port number in the COM z Port. Inserting the AC plug to turn the power on. Click Connect button.
  • Page 29 (5) If successful communication between PC from the unit, "Connected" will be displayed. Connecting target... Connected (6) Click Ram File [...] button. Then choose the "OnBoard_M330.s32". Click Open button. Connecting target... Connected...
  • Page 30 (7) Click "Flash File [...]". Choose the "Hex File ( z .S32)". Choose the "CD5005_XXXXX.s32". Click Open button. Connecting target... Connected OnBoard_M330_RamFile.s32 (8) Click Start button. Connecting target... Connected OnBoard_M330_RamFile.s32 CD6005_130528-01.s32 Start...
  • Page 31 (9) If the software is updated successfully, "OK." appears. Click OK. Disconnect mains cord from the unit, and then disconnect FFC of connection JIG from the unit. (10) Initializing the unit. Remove the AC plug. Press the "OPEN/CLOSE" and " 3 " buttons simultaneously while inserting the AC plug to turn the power on. (11) After updating the firmware, check the version.

  • Page 32: Trouble Shooting

    TROUBLE SHOOTING 1. POWER 1.1. Power not turn on When the power turned on, Power not turn on. does the ON/STANDBY indicator on the front panel flashing red? Is the CUP12663Z-1 POWER PCB connector disconnected? Insert any disconnected connectors. • CN3901, CN3902, CN901, CN902 Is the CUP12662Z_A MAIN PCB connector disconnected? Insert any disconnected connectors.

  • Page 33: Fld

    2. FLD 2.1. FL TUBE dosen't light Is the CUP12662Z_A MAIN Is the input voltage (+49.3V) FL TUBE Check the circuit and soldering of PCB VP output voltage of the CUP12663Z-1 POWER dosen't light. the transistor (Q3901) and output (+25V) normal? PCB transistor collector load, and replace any faulty parts.
  • Page 34 2.2. FLD Control Waveform DIS_CD DIS_SCL(CP) DIS_SO(DA) 2.3. Remote control is not accepted Remote control is not accepted. Check the U3904 input voltage of the Is the power voltage (FST+3.3V) CUP12663Z-1 POWER PCB, and the other of the CUP12663Z-4 FRONT PCB circuits and soldering that handle the output remote control sensor (U4001) load.

  • Page 35: Sound

    3. NO SOUND 3.1. No sound is output when a CD is played back No sound is output when a CD is played back. Is the CUP12662Z_A MAIN PCB connector Insert any disconnected disconnected? connectors. • CWC100, CWC101, PFCK10, CN2101, CN3101 Is the CUP12663Z-2 AUDIO PCB connector Insert any disconnected disconnected?
  • Page 36 3.2. DAC Input Signal Waveform MCLK DATA LRCK...

  • Page 37: Measuring Method And Waveforms

    MEASURING METHOD AND WAVEFORMS Measuring Disc: 4822 397 30184 TCD-784 (It is better to use wires for extending between the probe and test points.) CPU12662Z_A MAIN PCB ASSY: TEST POINT W8 W6 W5 W7 W4 W3 W2 W1 q w e t r y u i Q0 o Q2 Q1 RFEQO DIS CD...
  • Page 38 WAVEFORMS 1. DISC PLAY RF WAVEFORM（EYE-PATTERN） 2. DISC DETECTION 1.1 CD（TCD-784）Play 2.1 CD（TCD-784）DISC DETECTION ②RFO 200mV ③FSMONIT ④FOO ①RFEQO 500Mv ⑤TEI ⑥ TRO ⑦FMO ⑧DMO 2.2 CD-R（TCD-R000RM）DISC DETECT 1.2 CD-R（TCD-R000RM）Play ②RFO 200mV ③FSMONIT ④FOO ①RFEQO 500Mv ⑤TEI ⑥ TRO ⑦FMO ⑧DMO 2.3 CD-RW（TCD-W000RM）DISC DETECTION 1.3 CD-RW（TCD-W000RM）Play...
  • Page 39 3. TOC READ 4. FOCUS ADJUSTMENT 3.1 CD（TCD-784）TOC READ 4.1 CD（TCD-784）FOCUS ADJUSTMENT ②RFO ③FSMONIT 200mV ④FOO ⑤TEI 500Mv ⑥ TRO ⑦FMO ⑧DMO 3.2 CD-R（TCD-R000RM）TOC READ 4.2 CD-R（TCD-R000RM）FOCUS ADJUSTMENT   ②RFO ③FSMONIT 200mV ④FOO ⑤TEI 500Mv ⑥ TRO ⑦FMO ⑧DMO 3.3 CD-RW（TCD-W000RM）TOC READ 4.3 CD-R（TCD-R000RM）FOCUS ADJUSTMENT ②RFO  1V...
  • Page 40 Personal notes:...

  • Page 41: Block Diagram

    BLOCK DIAGRAM CD5005 Block Diagram NJM2068D...

  • Page 42: Power Diagram

    POWER DIAGRAM                 ...

  • Page 43: Wiring Diagram

    WIRING DIAGRAM FLASHER PCB CUP12663Z-7 AC INLET BN2801 N2801 Only U Version MAIN PCB 3P VH(2Pin NC) CN3901 CUP12662Z AUDIO PCB POWER PCB 13P BOARD IN CUP12663Z-2 FCC300 PFCK10 CN101 CN100 CUP12663Z-1 16 Pin FFC CN3902 CN3301 19 Pin FFC 3P VH(2Pin NC) CN901 CN902...

  • Page 44: Printed Circuit Boards

    PRINTED CIRCUIT BOARDS Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu). MAIN (A SIDE) MAIN (B SIDE)
  • Page 45 AUDIO(A SIDE) AUDIO (BSIDE) FLASHER (A SIDE) FLASHER (B SIDE) TRANS (A SIDE) TRANS (B SIDE) EARPHON (A SIDE) EARPHON (B SIDE) STANDBY (A SIDE) STANDBY (B SIDE)
  • Page 46 POWER (A SIDE) POWER (B SIDE) FRONT (A SIDE) FRONT (B SIDE)

  • Page 47: Schematic Diagrams (1/4 )

    +12V 1SS133MT 1SS133MT ST+10V D3111 D3112 BK13 R606 AUDIO OUTPUT UNIT C3123 Q3303 KSC1845FTA 1500P Q3117 Z3502 KRA104S C3122 Q3118 STYLE_PIN KRC104S 1000P Q3121 A_MUTE Z3504 Q3116 KRC104S KSC1845 Q3301 STYLE_PIN KSA992FTA Z3503 STYLE_PIN Q3112 KSA992FTA K3101 Z3505 IC61 C3110 100/25V C3111 SHORT R3126...

  • Page 48: 02-Front2

    FCB300 TO FCC300 FCB300 U4003 16-ST-103GINK B4001 FST+3.3V C4002 0.1uF FDGND OPEN C4015 100P C4016 100P FCHGND C4017 100P 0.1uF C4007 FCHGND +42V LDGND2 FDGND DIS+3.3V FST+3.3V Q4102 KRA102S FDGND STBY-LED CHG_LED FST+3.3V STBY-LED FST+3.3V FST+3.3V R94EV1A U4001 KEY2 KEY2 CN4101 BN4101 FST+3.3V VOUT...

  • Page 49: 03-Main1

    TO 0A R111 +3.3V_D1 +1.5V_D1 R170 GND_DA GND_D R142 VREF C149 1000P C129 R143 OPEN R144 OPEN +3.3V_D2 R145 OPEN R146 OPEN +1.5V_D1 IC103 CLZBLM21PG221SN1 +3.3V_D L103 OPEN C134 0.01uF 0.1uF C127 2200P C118 C126 C158 C119 R113 R149 100K VCOI 100/10V 0.1uF...

  • Page 50: 04-Main2

    TO A0 ST+5V S300 D304 Q300 1SS355T GND_D HVTKRC102S OPEN Q301 ST+3.3V DSP_MCK +3.3V_DA MCK0 GND_D DAC_MCK REMOTE_IN GND_D Q302 +1.8V C3875S K300 IC25 CVILM1117C-1V8 R310 +3.3V_D GND_D +3.3V_D GND_D P307 PLL_SCL RN300 PLL_SDA GND_D CN2201 ST+3.3V GND_D GND_D 10KX4 0.1uF 0.1uF CDCE913PWR...

  • Page 51: Exploded View

    EXPLODED VIEW Please see the last chapter for the part list. S4 x2 S4 x1 S2 x2 S2 x2 S8 x3 S5 x1 S3 x1 S8 x2 S4 x1 S9 x2 S6 x3 S9 x2 S5 x1 S1 x4 S6 x3 S7 x8 S7 x2 S4 x1...
  • Page 52 Personal notes: Personal notes:...

  • Page 53: Packing View

    PACKING VIEW Please see the last chapter for the part list. UK plug (UK Only)

  • Page 54: Semiconductors

    SEMICONDUCTORS Only major semiconductors are shown, general semiconductors etc. are omitted to list. The semiconductor which described a detailed drawing in a schematic diagram are omitted to list. 1. IC's TMPM330FYFG(IC302) MAIN MCU PORT MAP Symbol Pin Name I/O Pu/Pd STBY Description 1 AN10/PD6 unused...
  • Page 55 Symbol Pin Name I/O Pu/Pd STBY Description 35 SCLK2/PF2 unused 36 TBINT1/PH3 unused 37 PB4 unused 38 TB0OUT/TP1 unused 39 INT6/PJ6 unused 40 TB1OUT/PI1 unused 41 PB5 unused 42 TB2OUT/PI2 unused 43 PB6 unused 44 SDA1/SO1/PF4 PLL_SDA CDCE913PWR data 45 SCL1/PF5 PLL_SCL CDCE913PWR Clock 46 SCLK1/PE6...
  • Page 56 TC94A92FG (IC17) TC94A92FG (IC100) DCD-710AE...
  • Page 57 TC94A92FG Terminal Function TC94A92FG Terminal Function Symbol Description Default Remarks DSP VCO - EFM and PLCK Phase difference VCoi signal output pin. 3 state output 3AI/F (DSP VCO control voltage inputr pin.) CD-DSP-Power supply for 3.3V RF RVDD3 amplifier core and PLL circuit Connect capacitor according with se SLCo EFM slice level output pin...
  • Page 58 Symbol Description Default Remarks Focus Error signal / Sub beam add signal FSMoNiT 3AI/F output pin(monitor pin/GND) RFZi 3AI/F RFRP 3AI/F Bulit-in serises R=500 Connect to VRo by 3AI/F capacitor. AVDD3 Power supply pin for 3.3 V CD analog circuits. Bulit-in serises R=3.3 k 3AI/F Bulit-in output R=3.3 k...
  • Page 59 Symbol Description Default Remarks DVSS3R Grounding pin for 3.3V Muiti-Bit DAC circuit R channel audio output pin of Audio DAC. 3AI/F DVDD3R Power supply pin for 3.3V Audio DAC circuit. DVDD3L Power supply pin for 3.3V Audio DAC circuit. L channel audio output pin of Audio DAC 3AI/F DVSS3L Grounding pin for 3.3V Muiti-Bit DAC Circuit...
  • Page 60 Default Symbol Description Remarks VDD3 Power Supply pin for 3.3V Digital circuit CMOS Port Schmitt input BUS0 Microprocessor I/F data input/output pin 0 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port Schmitt input BUS1 Microprocessor I/F data input/output pin 1 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port...
  • Page 61 IP4001 (IC14) IP4001 (IC101) (FIN) PGND2 DO4- DO4+ IN4A VCC2 VCC1 DO3+ DO3- DO5- DO5+ IP4001 IP4001 (IC14) (FIN) PGND2 DO4- DO4+ IN4A VCC2 VCC1 DO3+ DO3- DO5- DO5+ (FIN) DO1- DO1+ IN1A MUTE SGND DO2+ DO2- PGND1 REV IP4001 Pin Discriptions SYMBOL DESCRIPTION...
  • Page 62 CS4398 1. PINOUT DRAWING CS4398 (IC304) DSD_B DSD_A DSD_SCLK SDIN SCLK AMUTEC LRCK AOUTA- MCLK AOUTA+ DGND AGND M3 (AD1/CDIN) AOUTB+ M2 (SCL/CCLK) AOUTB- M1 (SDA/CDOUT) BMUTEC M0 (AD0/CS) VREF REF_GND CS4398 FILT+ CS4398 Terminal Function Pin Name Pin # Figure 1.

  • Page 63: Fl Display

    2. FL DISPLAY V.F.D (FUTABA, 16ST103GINK) (U4003) PIN CONNECTION...
  • Page 64 FRONT FRONT PCB ASS'Y ※Parts indicated by "nsp"on this table cannot be supplied. ※The parts listed b NOTE:The symbols in the column Remarks indicate the following destinations. U : North America model N : Europe model K : China model F : Japan model B : Black model SG : Silver gold model REF No.
  • Page 65 FRONT REF No. Part No. Part Name Remarks Q'ty New Ver R3228 RES, CHIP(1608/5%/470Kohm) CRJ10DJ474T R3229 00MGD05680160 RES, CARBON(1/5W,68ohm,J) CRD20TJ680T R3230 RES, CHIP(1608/5%/22Kohm) CRJ10DJ222T R3231 00MGD05680160 RES, CARBON(1/5W,68ohm,J) CRD20TJ680T R3301 RES, CARBON(1/5W,200ohm,J) CRD20TJ201T R3303 RES, CARBON(1/5W,68Kohm,J) CRD20TJ682T R3304,3305 RES, CARBON(1/5W,56ohm,J) CRD20TJ560T R3306 RES, CARBON(1/5W,68Kohm,J)
  • Page 66 FRONT REF No. Part No. Part Name Remarks Q'ty New Ver C3917 00MOA47702520 CAP, ELECT(25V/470uF) CCEA1EH471E C3919 CAP, CHIP(1608, 50V/0022uF) CCUS1H223KC C3921 943133502100S CAP, MYLAR(50V/01uF/J) HCQI1H104JZT C3922 CAP, CHIP(1608, 50V/01uF) CCUS1H104KC C3924 CAP, CHIP(1608, 50V/0022uF) CCUS1H223KC C3926 CAP , ELECT(63V/220uF) CCEA1JH221E C3929 CAP, ELECT(25V/1000uF)
  • Page 67 I.C , EEPROM (16KBIT,SOP-8P,K-Line) CVIK24C16BSIRGA IC301 943234009290S I.C , RESET 2.4V (200ms,C-MOS,SOT23-5P) CVIS80124CLMCJIJT2 IC302 I.C , FLASH U-COM(LQFP-100P) CVITMPM330FYFG_CU ┗IC302 943243102490S U-COM CD5005 (TMPM330FYFG, TOSHIBA) CVIANAM1783C IC304 90M-HC109330R AUDIO DAC (TSSOP-28 PACKAGE) HVICS4398CZ Q100 00D9430058908 T.R , CHIP , SOT-23 HVTKTA1504SYRTK Q101 00D2730464901 T.R , CHIP , SOT-23...
  • Page 68 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver R322 RES, CHIP(1608/5%/4.7Kohm) CRJ10DJ472T R322 RES, CHIP(1608/5%/1.0Kohm) CRJ10DJ102T R322 RES, CHIP(1608/5%/1.8Kohm) CRJ10DJ182T R322 RES, CHIP(1608/5%/8.2Kohm) CRJ10DJ822T R323 RES, CHIP(1608/5%/10Kohm) CRJ10DJ103T R326 RES, CHIP(1608/5%/10Kohm) CRJ10DJ103T R328 RES, CHIP(1608/5%/0ohm) CRJ10DJ0R0T R330,331 RES, CHIP(1608/5%/10Kohm) CRJ10DJ103T R332...
  • Page 69 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver C328 CAP, ELECT(10V/100uF) CCEA1AH101T C329 CAP, CHIP(1608, 50V/0.1uF) CCUS1H104KC C330 CAP, CHIP(1608, 50V/0.01uF) CCUS1H103KC C331 CAP, CHIP(1608, 50V/0.1uF) CCUS1H104KC C332 CAP, CHIP(1608, 50V/0.01uF) CCUS1H103KC C335 CAP, CHIP(1608, 50V/0.1uF) CCUS1H104KC C336,337 CAP, CHIP(1608, 50V/0.01uF) CCUS1H103KC...
  • Page 70 AUDIO PCB ASS'Y COP12663C-2 ┣31 POWER PCB ASS'Y COP12663C-1 ┣32 FLASHER PCB ASS'Y COP12663C-7 ┗★ TRANS PCB ASS'Y COP12663C-6 421410006004M BADGE , MARANTZ CGB1A206 943415100410M ORNAMENT, DOOR CGR1A552ZB37 943415100400M ORNAMENT, DOOR CGR1A552RMZD10 943416101150M WINDOW, FIP CGU1A423A12Y 943402104700M PANEL , AL FRONT...
  • Page 71 PACKING PACKING ※Parts indicated by "nsp"on this table cannot be supplied. ※The parts listed bNOTE:The symbols in the column Remarks indicate the following destinations. U : North America model N : Europe model K : China model F : Japan model B : Black model SG : Silver gold model REF No.

This manual is also suitable for:

Cd5005/n1bCd5005/n1sgCd5005/n1u1bCd5005/n1k1bCd5005/n1k1sgCd5005/fn

Table of Contents

Save PDF