– NEVER guess or take chances with electrical equipment of any kind— it is better to be safe than sorry! Thank you for purchasing a JVC speaker. Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer.
Page 3
• Speaker vibrations may cause howling. Place the unit as far away from the player as possible. • Take the occurrence of earthquakes or other...
Page 4
Follow Connecting Method Ç. This connection can be used for any amplifier, by connecting the front speaker terminals of the amplifier (usually named and printed as “FRONT SPEAKERS” or “MAIN SPEAKERS”). Before connecting this unit to the amplifier (or receiver), observe the following carefully.
1 Press and hold the clamp of the speaker terminal. 2 Insert the end of the speaker cord into the terminal as illustrated below. • Match the polarity of the speaker terminals: ª to ª and · to ·. 3 Release the finger from the clamp.
Page 6
Operations Front view Rear view VOLUME FREQUENCY 50Hz ı 200Hz VOLUME CUT OFF FILTER PHASE Î NORMAL REVERSE AUTO POWER ON/STANDBY PHASE RIGHT LEFT/MONO CANCEL ‰ AUTO POWER RIGHT ON/STANDBY RIGHT Å POWER POWER Turning On the Power—POWER Å Press the ON [ ❙ ] portion of the POWER switch. The main power turns on and the power lamp in the front panel lights in green.
Page 7
• Once it is set, only the sounds below the frequency come out of the built-in speaker. When the main speakers in use are JVC’s SX-XD33 Press in the CUT OFF FILTER button to set it to the _ FIX position.
The unit is overloaded because of a large volume. Type : Powered subwoofer Bass-reflex type, (magnetically shielded type) Speaker unit : 16.0 cm cone (× 1) Frequency range : 30 Hz to 200 Hz Input impedance : 50 kΩ (LOW-LEVEL) 470 Ω...
Page 9
VICTOR COMPANY OF JAPAN, LIMITED 0702NSMMDWJSC – 10 – EN, GE, FR, NL, SP, IT, SW, DA, FI...