Network Connections Menu - Viavi ATC-5000NG Operation Manual

3.8.2

NETWORK CONNECTIONS MENU

The Network Connections Menu displays the current network settings and allows changing the network
settings. There should be three connections: 1) Front LAN; 2) Rear LAN; 3) DSP Connection. (Names
could be different.)
The screen displays the current settings, whether the IP is static or dynamic and if connected what is the
current IP address. The internal connection is at IP Address 192.168.0.1 (Factory Setting). The IP
Address should not be changed unless required to use this address for the external connections. All
Ethernet communications to the ATC-5000NG are on port 2001.
Example
Select the Rear LAN line on the grid of the current menu and press the Change Settings
Softkey to change the IP of the Rear LAN from dynamic to static.
Figure 1.2.3 - 76 System Menu, Network Connections Menu
Screen Components
Name
IP Address
IP Auto
Subnet Mask
1-2-3
Page 110
Description
Displays the Name of the Ethernet Adapter.
Displays the IP Address of the Ethernet Adapter.
Displays the IP Auto of the Ethernet Adapter.
Displays the Subnet Mask of the Ethernet Adapter.
ATC-5000NG ATC/DME Test Set Operation Manual
Subject to Export Control. See Cover Page for details.
Operation, Menus and Screens
System Menu
Rev. L0
February 2020