Advertisement
152
Removal
Cable Removal
Step 5
Insert a protective cover into the –48V DC port.
Step 6
Verify that no power is present by measuring voltage on the power cable using a DMM.
✓
This task is complete.
7.1.2
Remove RF Cables
This procedure describes how to disconnect the four RF cables from the RU.
Prerequisite:
■ RU powered off
Step 1
Remove the weatherproofing from each connector according to local guidelines.
Step 2
Loosen each RF connection between the RU and the antenna.
Step 3
Disconnect the RF cables from the RF port on the RU.
Step 4
Insert protective covers into the RF ports.
Continue with the next task.
7.1.3
Remove AISG Cable
This procedure describes how to remove AISG RET cable from the RU.
Prerequisite:
■ RU powered off
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0
Advertisement
