Interroll Diverter SH 1500 Installation And Operating Instructions Manual page 39

Version 1.0 (06/2022) en
Translation of original operating instructions
Interroll Diverter SH 1500
Installation
Module conveyor curve to the left - away from diverter (M)
The connecting tab is used to connect a diverter and a left module conveyor curve in conveying
direction away from the diverter as well as a right module conveyor curve in conveying direction
towards the diverter.
1 2
1 Diverter
2 Module conveyor curve
4 Position the modules to be connected (1, 2) in such a way that the side profiles are aligned.
4 Align the top edges of the modules by using the height-adjustable feet of the supports.
4 Check horizontal alignment with a spirit level or rotation laser.
4 Secure the adjusted height.
4 NOTICE! Observe conveying and curve direction! Use the connecting tab (3) to connect
the module conveyor curve (2) and the diverter (1) at the outer radius of the side profile
using the screw (4).
4 Fasten the module torsion-free, e.g., by anchoring it to the floor or to adjacent components.
3 Connecting tab
4 Torx screw
3
4
39