JVC CU-VH1EXS Instructions Manual page 8

8
EN
How To Attach The Core Filter
Attach the core filters to the cables. The core filter
reduces interference.
Types of core filters
Size Cable
Audio/video cable
Large (A)
S-video cable
Large (B) i.LINK cable*
Medium USB cable**
DC cord
Small
Audio cable
* Optional
(If you have an optional JVC i.LINK cable
VC-VDV206U or VC-VDV204U with core
filters, it is not necessary to attach the provided
core filter. If you are going to use any other
i.LINK cable, attach the provided core filter.)
** Attach two core filters to both ends of the cable.
The procedure below is an example of winding
cable once.
1
Release the stoppers on both ends of the core
filter.
Stopper
2
Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter. Wind the cable once around
the outside of the core filter as shown in the
illustration.
Wind the cable so that it is not slack.
3 cm
3
Close the core filter until it clicks shut.
Times to
wind
Once
NOTES:
Take care not to damage the cable.
Twice When connecting a cable, attach the end with the
core filter to the player.
Once
Once
Wind once.