JVC CU-VD40 Copying Manual page 2

IMPORTANT
Please read carefully before use.
1. Set up each device before playback
High definition
Everio
Dedicated USB cable
1
TV
1
Disconnect the USB cable then turn off CU-VD40
•
It is not possible to switch to play mode if the power is not turned off.
2
Connect CU-VD40 to the TV
3
Turn on CU-VD40
•
Confirm that the power lamp lights in orange.
After turning on the power, wait for approximately 20 seconds before
proceeding to step .
4
The burner may not function properly within this 20 seconds.
4
Insert a finalized recommended disc
•
It is not possible to play back an unfinalized disc.
Preparations completed! Proceed to step 2.
Easy and correct way of playing back a DVD
(See overleaf on copying to the DVD)
CU-VD40
disconnect
4
3
2
Audio/Video cable
2. Viewing videos copied to DVD on the TV
Operate using the CU-VD40 remote control.
1
Select "PLAY VIDEO"
1 Select
2 Confirm
2
Select "EVERIO VIDEO"
1 Select
2 Confirm
3
Select "NORMAL BACK-UP"
1 Select
2 Confirm
4
Select the date when the video
was copied to the DVD
1 Select
2 Confirm
5
Select the folder to be played
•
The files in the folder will be played sequentially
starting from the selected file.
1 Select
2 Confirm
(TV screen display)
Only a portion of the menu screen
is shown here
PLAY VIDEO PLAY IMAGE
PLAY VIDEO
EVERIO VIDEO
EVERIO VIDEO
NORMAL BACK-UP
DATE BACK-UP
EVENT BACK-UP
FILE BACK-UP
PLAYLIST BACK-UP
NORMAL BACK-UP
06060101
06123199
06060101
PRG001
PRG002
PRG003
PRG004
PRG005
PRG006
PRG007
PRG008