Fig. 13: Ce Foot Contact Surface; Fig. 14: Te Foot: Handling Of Cup Spring Contact Surface / Foot Contact Surface - ABB HT596632 Operation Manual

Operation Manual / 4 Product description / A100-M axial
2 Removal and installation / 2.3 Installing the turbocharger
Fixing clamping nuts
Fig. 13: CE foot contact surface
Tighten clamping nuts on compressor end (CE) (see
u
Fig. 14: TE foot: Handling of cup spring contact surface / foot contact surface
Grease the contact surface (F) for the cup springs (X)
u
sion and strength class →14)
grease.
Tighten clamping nuts on turbine end (TE) (see
u
© Copyright 2020 ABB. All rights reserved.
on the foot of the turbine end (TE) with high-temperature
Tightening the clamping nut
HZTL4033_EN
Tightening the clamping nut
(see Table 3: Foot screws, dimen-
Rev.E
→16).
→16).
May 2020