Mindray DC-32 Service Manual page 125

2. Remove the fixing clips, ground wire clip, and the M4X12 screws (3 pcs) securing
the ground wire holder; take out the cable plug.
3. Remove the M4X12 screws (6 pcs) for fixing the monitor.
4. Hold the lateral sides of the monitor and raise the monitor to separate it from the
support arm hooker when the monitor is 20° from the vertical direction, and then
remove the monitor.
Fig 7-3 Disassemble the Monitor Module (1)
Fig 7-4 Disassemble the Monitor Module (2)
Fig 7-5 Disassemble the Monitor Module (3)
Structure and Assembly/Disassembly 7-25