Page 1
CD RECEIVER РЕСИВЕР С ПРОИГРЫBATEЛEM KOMПAKT-ДИCКOB KD-S747 COMPACT DIGITAL AUDIO For installation and connections, refer to the separate manual. INSTRUCTIONS ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ GET0138-001A [EE]...
Position And Reproduction Of Labels Bottom panel of the main unit Name/Rating plate Caution: This product contains a laser component of higher laser class than Class 1. How to reset your unit While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds. This will reset the built-in microcomputer.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ... How to use the M (MODE) button ...
Turning on the power Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. Select the source. To operate the tuner (FM or AM), see pages 7 –...
Setting the clock Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” or “TEL” appears on the display. Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour. Set the minute.
Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Selected band appears.
Tune in to a station you want while “M” (manual) is flashing. To tune in to stations of higher frequencies To tune in to stations of lower frequencies • If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band. Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
CD OPERATIONS Playing a CD Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically. Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. The CD–in indicator flashes.
Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold ¢ while playing a CD, to fast- forward the track. Press and hold 4 while playing a CD, to reverse the track. To go to the next or previous tracks Press ¢...
Selecting CD playback modes To play back tracks at random (Disc Random Play) You can play back all tracks on the CD at random. Press M (MODE) to enter the functions mode while playing a Press RND (random), while still in the functions mode, so that “DISC RND”...
Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. Select the sound mode you want. When you press the button once, the last selected sound mode is recalled and applied to the current source.
Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: (bass) (treble) LOUD (volume) (loudness) Indication To do: BAS* Adjust the bass.
Selecting the level display You can select the level display according to your preference. When shipped from the factory, “AUDIO 2” is selected. Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” or “TEL” appears on the display.
Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • This unit does not work at all. • SSM (Strong-station Sequential Memory) automatic preset does not work.
MAINTENANCE Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), and CD-RWs (Rewritable). • This unit is not compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): 17 W per channel into 4 Ω, 40 Hz Front: to 20 000 Hz at no more than 0.8% total harmonic distortion. 17 W per channel into 4 Ω, 40 Hz Rear: to 20 000 Hz at no more than...
• The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. Before mounting: Press (control panel release button) to detach the control panel if already attached.
Page 22
• When using the optional stay • Washer Fire wall Dashboard Sleeve Less than 30˚ Removing the unit • Before removing the unit, release the rear section. Remove the control panel. Remove the trim plate. Insert the 2 handles into the slots, as shown. Then, while gently pulling the handles away from each other, slide out the unit.
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers. • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR ENTERTAINMENT dealer.
Page 24
* Are the “–” terminals of L and R speakers grounded in common? Fig. 3 Solder the core wires to connect them securely. Rear speakers Remote lead JVC Amplifier Blue with white stripe LINE KD-S747 REAR *2 : Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not...