Related Manuals for Insignia NS-URSS22
Summary of Contents for Insignia NS-URSS22
- Page 1 QUICK SETUP GUIDE Racing Wheel Stand NS-URSS22 Before using your new product, please read these instructions to prevent any damage.
-
Page 2: Package Contents
PACKAGE CONTENTS WARNING CHOKING HAZARD - Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths. SHIFTER ARM SHIFTER PLATE WHEEL STAND WHEEL PLATE M6 ALLEN KEY WRENCH 10mm 6 X WASHERS M8 ALLEN KEY WRENCH 12mm... - Page 3 STEP 1: Pull out the latch to unfold the wheel stand. Then lay down the pedal frame. STEP 2: Install the knobs on the pivot joints. Secure it in place with 2 M8 41mm knobs. PARTS: 2 X M8 KNOB 41mm 2 X M8 NUTS WRENCH 12mm...
- Page 4 STEP 3: Loosen the preinstalled knobs on the vertical posts. Adjust to your desired height and then tighten the knobs to secure it in place. PARTS: 2 X M8 KNOB 16MM STEP 4: Loosen the bolts on both sides. Adjust the pedal plate to your desired angle and retighten the bolts.
- Page 5 STEP 5: Line up the holes on the frame and wheel plate. Secure it using the M8 16mm bolts and nuts. PARTS: 3 X M8 BOLT 16mm 3 X M8 NUTS WRENCH 12mm M8 ALLEN KEY STEP 6: Line up the hole on the shifter plate with the slots on the shifter arm. Install the bolts and secure using the M6 16mm bolts and nuts.
- Page 6 STEP 7: The shifter mount can be used on the left or right side of the wheel stand. Pick your preferred side. Then line up the holes on the shifter mounting arm with the threaded inserts on the vertical post. Secure it in place with 2 M8 40mm bolts and nuts. PARTS: 2 X M8 BOLT 40mm 2 X M8 NUTS...
- Page 7 FULL RANGE OF ADJUSTABILITY 1. Wheel angle adjustment 2. Wheel and Shifter height adjustment 3. Pedal plate angle adjustment...
- Page 8 FOLDABLE DESIGN ALLOWS EASY STORAGE 1. Lift the pedal frame. 2. Pull in the latch to secure the pedal assembly. 3. Loosen the knobs on the pivot joint. 4. Pull the legs together to fold the stand. 5. Once fully open or closed, tighten all knobs to secure the stand.
-
Page 9: One-Year Limited Warranty
(2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. - Page 10 WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD.
Need help?
Do you have a question about the NS-URSS22 and is the answer not in the manual?
Questions and answers