Table of Contents
Advertisement
Note: If you are using Epson ScanSmart to scan multiple photos at once, just make sure they are at
least 0.2 inch (4.5 mm) away from the edge of the scanner glass and at least 0.8 inch (20 mm) away
from each other.
Note: If you are placing an ID card on the scanner glass, position the card 0.19 inch (5 mm) from the
corner of the scanner glass.
Note: When placing bulky originals such as books, prevent exterior light from shining directly onto
the scanner glass.
3. Close the document cover gently to keep your original in place.
Caution: Do not push down on the document cover or scanner glass or you may damage the
product.
Warning: Be careful not to trap your fingers when closing the document cover or you may be
injured.
Remove your originals after scanning. If you leave the originals on the scanner glass for a long time, they
may stick to the glass surface.
Parent topic:
Related topics
Copying
Faxing
Scanning
Placing Originals in the Automatic Document Feeder
You can place single- or multi-page original documents in the Automatic Document Feeder (ADF). Make
sure the originals meet the Automatic Document Feeder specifications before loading them.
Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or
other materials that could obstruct the feeder.
Caution: Do not place photographs or valuable artwork in the ADF. Place fragile or valuable originals on
the scanner glass to avoid wrinkling or damaging them.
Placing Originals on the Product
75
- Quick Links:
- Wf-2950 User's Guide
- Using the Control Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-2950 and is the answer not in the manual?
Questions and answers
how do i clear the printer cache
HI, Our 3 year old grandson was left unattended at our computer and printer. since then out printer isn't working, it seems fine except it doesn't print. Paper goes thru, sounds like its printing, paper comes out blank.
How to remove a small plastic stick on for sign here left on a paper I was copying
When I print from Libra Office on my Mac I get poor ink . There are blank ink spaces
My printer is only making faded lines /new ink/just bought
Where is the + sign to enter password on LCD screen for Wifi?
how to change the 'type of paper' setting
To change the 'type of paper' setting on the Epson WF-2950:
1. Press the Home button on the printer.
2. Select Settings > General Settings > Printer Settings > Paper Source Settings > Paper Setting.
3. Select Paper Type.
4. Choose the paper type you have loaded (e.g., Plain Paper, Premium Photo Paper Glossy, etc.).
5. Press the Home button to exit.
Make sure the selected paper type matches the paper you loaded.
This answer is automatically generated
I **** trying to print black and white. It will not print black and white; it says I **** out of magenta. Why will it not print black and white when I **** out of magenta? Thanks