System - Xoro HRS 8664 User Manual

Settings

System

Parental Guidance
You can define here whether a program will only
be displayed after a correct entry of the password.
Note: Information on the age limit of a DVB pro-
gram is not broadcasted in Germany.
Set Password
You can change your password here. At first you
have to confirm the old password (standard 0 0 0 0
0 0). After confirming the old password type in the
new password and repeat it. If all data was correct
the new password is active.
Note: For the case the password is forgotten, you can use the super password to set a new pass-
word.
Super Password: 8 8 8 8 8 8
Restore Factory Default
You can cancel all settings and changes by restoring the factory default. Choose this option and
input the password.
Note: All settings will be cancelled. You will have to go through the channel scan once more.
Information
Access information on software and hardware.
Recall List
You can change the function of the RECALL button. If "off" is given, the receiver displays the last
program upon pressing the RECALL button. IF it is set "on", a list of programs seen at last will be
displayed upon pressing RECALL.
Software update
USB upgrade
If an update is necessary, the update software and the update instruction are to be found on
www.xoro.de. Please install only the suitable XORO firmware. Installation of a false firmware may
make the receiver unusable and void your claim on warranty.
Network Setting
Line Type:
The receiver only support LAN, this option can't be changed.
IP Setting:
Normally, please set DHCP to "On" to get IP address automatically. Status will display "Internet" if
network is available.
ENG 35