Page 1
THANK YOU FOR PURCHASING OUR QUALITY PRODUCT. IF YOU HAVE ANY QUESTIONS PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT YOUR NEAREST COST PLUS WORLD MARKET STORE, OR CALL OUR TOLL FREE NUMBER 877-967-5362 FOR ASSISTANCE. Page 1...
Page 2
Part List C2 : C1 : Left Side Frame Right Side Frame - 1 pc - 1 pc D: Back Vertical Rail B : Bottom Frame A : Top Frame - 1 pc - 1 pc - 1 pc E1 : E2 : Left Divider Right Divider...
Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished. In case of missing parts, please contact your nearest Cost Plus World Market store or our customer service call center 877-967-5362. Page 3...
Assembly Steps Step 1 On a non-marring surface, position and secure Left Side Frame (C1), Right Side Frame (C2) to Bottom Frame (B) with Flat Washers (H-7), Lock Washers (H-6) and Bolts (H-1). Then, position and secure Left Divider (E1), Right Divider (E2) and Middle Divider (E3) to Bottom Frame (B) with Flat Washers (H-7), Lock Washers (H-6) and Bolts (H-2) by using the Wrench (T-1).
Page 5
Step 3 Position and secure Top Frame (A) to assembled unit with Flat Washers (H-7), Lock Washers (H-6) and Bolts (H-1) by using the Wrench (T-1). Use the provided 90° Triangle (T-5) and adjust the corners to make sure the Bookcase is square. Fully tighten all Bolts from this and all previous steps.
Page 6
Step 5 H-13 Back Position and secure Back Panels (H-1) and Side Back Panels (H-2) to the back of assembled unit with Pan Head Screws (H-13) by using the Phillips Screwdriver (T-4). Do not over tighten. Step 6 H-11 Front Insert Shelf Pins (H-11) into the pre-drilled holes on the Left and Right Dividers (E1&E2).
Page 7
Step 7 H-12 H-12 Insert and secure Door Supports (G) to the top Right and Left Doors (F1 & F2) with Nuts (H-12), Lock Washer (H-6), Flat Washers (H-7), Bolts (H-3), Flat Head Bolts (H-5) by using the Wrench (T-1), Socket Wrench (T-2) and Allen Key (T-3). Fully tighten Nuts and Bolts. Position and secure Handles (M) to Left and Right Doors (F1 &...
Step 8 - Leveling Procedure Cabinet Wall Cabinet Wall Cabinet Wall Adjust leveler to make Cabinet parallel to the Wall. Step 9 - Install Anti-tip Kit H-14 Back Install Anti-Tip Kit (H-11) to the top of both back corners as well as to the wall. Install them with the Screws and Plastic Straps provided.
Page 9
Step 10 The Farmhouse Barn Door Bookcase is assembled and ready for use. Page 9...
Care & Maintenance Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. Cleaner Do not place furniture in direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside.
Need help?
Do you have a question about the 507839 and is the answer not in the manual?
Questions and answers