TELETRAC NAVMAN iFace Quick Start Manual

iFace
QUICK START GUIDE
IN-VEHICLE COPY
AU Edition © Copyright Teletrac Navman 2018
Functions of the iFace
Functions of the iFace
Push button to remove
iFace from cradle
Device can
be secured to the
cradle with m3
screws
TROUBLESHOOTING
I can't create myself as a driver?
Drivers must be set up in
NextGen first before creating a
"New Driver". Please contact your
inline/depot manager and
request that a driver account be
created for you in NextGen.
The iFace won't switch on?
Ensure the screen is connected to the charger and that a
lightning bolt battery icon appears in the corner of the screen.
Hold the power button to switch the iFace on. If this doesn't
wake the device, it's likely that there is no charge in the battery.
Please try charging the device with a 240v AC Charger (not
supplied)
If your device is still not working, please notify your inline/depot
manager of the issue and which vehicle the device is from.
TROUBLESHOOTING
I can't log into Sentinel?
Check that the iFace has successfully paired with the IVU by
looking for two Bluetooth symbols (one in each corner).
If only one Bluetooth symbol appears, hold the power button
down for 10 seconds to reboot the iFace. Whilst rebooting turn
the vehicle ignition off, then on.
Please Note: iFaces that contain a Sim card do not require
Bluetooth. Position of Bluetooth symbols may differ between
iFace models.
TROUBLESHOOTING
My iFace just shutdown on its own
When the vehicle's ignition is off, the iFace will automatically
shutdown to conserve the internal battery for smooth start up
the next time the vehicle is switched on.
To power the iFace back on, either switch the vehicle's ignition
back on, or press and hold the power button for 3 seconds.
Please note it might be necessary to perform a hard reboot
(hold power button for 10 seconds)