Doosan DL200 Operation And Maintenance Manual page 31

Fire Extinguisher and First Aid Kit
As a precaution if any injury or fire should occur, always do
the following.
• Be sure that fire extinguishers have been provided
and read the labels to ensure that you know now
to use them.
appropriately
multipurpose "A/B/C" fire extinguisher be mounted
in the cabin.
extinguisher at regular intervals and make sure
that all work site crew members are adequately
trained in its use.
• Provide a first aid kit in the storage compartment
and keep another at the work site. Check the kit
periodically and make any additions if necessary.
• Know what to do in case of injury from fire.
• Keep emergency numbers for doctor, ambulance
service, hospital and fire department near your
telephone.
If the machine catches fire, it may lead to serious personal
injury or death. If a fire occurs during operation, escape
from the machine as follows:
• Turn the starter switch to the "O" (OFF) position
and shut down engine.
• If there is time, use the fire extinguisher to
extinguish as much of the fire as possible.
• Use the handrails and steps to escape from the
machine.
The above is the basic method for escaping from the
machine, but changing the method may be necessary
according to the conditions, so carry out practice drills at the
work site.
Protection from Falling or Flying Objects
On work sites where there is danger that falling objects or
flying objects may hit the operator's cabin select a guard to
match the operating conditions to protect the operator.
Working in mines, tunnels, deep pits or on loose or wet
surfaces could produce danger of falling rock, roll over or
hazardous flying objects. Additional protection for operator's
cabin could be required in form of a FOPS/Falling Object
Protective Structure
Structure reinforcement system.
Safety
It is recommended
sized (2.27 kg [5 lb]
Check and service
and/or ROPS/Roll Over
that an
or larger)
the fire
Figure 9
Protective
Figure 10
HDO1009L
HAOA110L
OP000506
1-19