Advertisement
Quick Links
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
ASSEMBLY
1
BASE
SETUP
1
Connect to your PC or Mac USB INPUT.
SETUP GO TALK WITH PC (WINDOWS 7, 8, or 10)
1. From the Start menu, select the Control Panel.
2. From the Control Panel, select the Sound icon.
3. Select the Recording tab and select "JLab GO Talk".
4. Select the Playback tab and select "JLab GO Talk".
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
support@jlab.com
Reach out to us at
jlab.com/contact
or visit
2
5/8" & 1/4" ADAPTER
Place the microphone through 5/8" or 1/4" mount
and screw on adapter to lock.
5/8"
1/4"
Enter your PC or Mac settings to make sure
2
connection is established.
SETUP GO TALK WITH MAC (macOS 10.10 or HIGHER)
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select "JLab GO Talk".
3. Select Output tab and select "JLab GO Talk".
4. From this screen, set the Output volume to desired level.
REGISTER TODAY
jlab.com/register
Product updates
|
How-to tips
Advertisement
Related Manuals for JLab GO TALK
Summary of Contents for JLab GO TALK
- Page 1 Enter your PC or Mac settings to make sure Connect to your PC or Mac USB INPUT. connection is established. SETUP GO TALK WITH PC (WINDOWS 7, 8, or 10) SETUP GO TALK WITH MAC (macOS 10.10 or HIGHER) 1. From the Start menu, select the Control Panel.
- Page 2 • No additional drivers/software are needed for the GO Talk. Simply plug in and setup in device settings. • GO Talk will not work through most tablets or mobile phones due to their power limitations. The output power source needs to produce 5v or greater to operate.
Need help?
Do you have a question about the GO TALK and is the answer not in the manual?
Questions and answers