Autool BT360 Quick Start Manual
  1. Manuals
  2. Brands
  3. Autool Manuals
  4. Test Equipment
  5. BT360
  6. Quick start manual

Autool BT360 Quick Start Manual

Battery system tester
Hide thumbs Also See for BT360:
Table of Contents

Advertisement

Quick Links

Download this manual
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in several countries
including China, the trademark is
With regard to the other trademark, service logo, domain, icon and company name
mentioned in this manual, they shall all belong to AUTOOL and its other affiliated
company, in other countries without the registration yet of these trademark, service
logo, domain name, icon and company name of AUTOOL, here we announce they
are owned by AUTOOL. Any company or person shall not use the trademark,
service logo, domain name, icon and company name of AUTOOL before getting
approved by AUTOOL with written certificates. Please visit our website
www.autooltech.com or email at aftersale@autooltech.com to contact us.
Attention
Non- technical person shall not change, disassemble or repair the product,
otherwise all losses caused by this shall be bared by the user himself.
Please do not scratch, bend, twist or stretch the wires. Do not place the wires
in high temperature. Do not press hard or decompose the on-board charging
adapter.
Please do not place nails, pins, and other small debris on the charging port, in
order to avoid damaging the charging connector.
Do not place the product in unstable place such as high altitude area, slope,
or shelf.
This product is powered by electricity and should not be used as a toy for
children.
To avoid short circuit, do not immerse the product in water or other liquid.
Please try to use the power supply and power cord supplied by manufacturer
as standard.
Please do not expose this product to strong light or high temperature when
it's not at use.
Autool BT360 Battery System Tester
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autool BT360

Summary of Contents for Autool BT360

  • Page 1 China, the trademark is With regard to the other trademark, service logo, domain, icon and company name mentioned in this manual, they shall all belong to AUTOOL and its other affiliated company, in other countries without the registration yet of these trademark, service logo, domain name, icon and company name of AUTOOL, here we announce they are owned by AUTOOL.

  • Page 2: Table Of Contents

    Autool BT360 Battery System Tester Table of Contents Chapter 1 Product Summary..................1 1.1 Product Profile....................1 1.2 Product Function...................1 1.3 Technical Parameters...................2 1.4 Working Environment Requirement............3 Chapter 2 Tester Structure...................3 Chapter 3 Operation..................... 4 3.1 Pre-Test......................4 3.1.1 Connect Tester................. 4 3.1.2 Key Description................4...

  • Page 3: Chapter 1 Product Summary

    AUTOOL Autool BT360 Battery System Tester I. Product Summary 1.1 Product Profile BT-360 Battery Tester adopts currently the world's most advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy...

  • Page 4: Technical Parameters

    AUTOOL Autool BT360 Battery System Tester it can find out whether the starting motor works fine. There are several reasons why the starting motor is abnormal: lubricating system fault causing the starting loaded torque increasing or rotor friction of the starting motor causing the increasing friction of the starting motor itself.

  • Page 5: Working Environment Requirement

    It is applicable for automotive manufacturers, automotive maintenance and repair workshops, automotive battery factories, automotive battery distributors, and educational organizations, etc. 2. Tester Structure BT360 mainly consists of battery tester main unit and testing cables. BT360 Battery Tester main unit cover is made of ABS acid-resistant plastic.

  • Page 6: Chapter 3 Operation

    ● Return key Return to previous menu via blue RETURN key. ● OK key Confirm the selection via green OK key 3.2 Tester Startup Tester automatically starts up after the clamps are correctly connected, and displays the AUTOOL startup interface (Default...

  • Page 7: Select Language

    AUTOOL Autool BT360 Battery System Tester voltmeter is ON) refer to figure 1. Figure 1. Startup Interface with Voltmeter on At the middle bottom of the startup interface, it displays the voltmeter value, which can be used as DC voltmeter. DC Voltmeter test range is 8-30DCV, out of which will damage the tester.

  • Page 8: In-Vehicle Or Out-Of-Vehicle

    AUTOOL Autool BT360 Battery System Tester Figure 3, Interface with tester model and version Tester will display the following contents in a sequence, select accordingly. 3.4.1 IN-VEHICLE or OUT-OF-VEHICLE Press UP/DOWN key to select the battery location, in vehicle or out of vehicle, then press OK key to confirm.

  • Page 9: Select Battery Charge State

    AUTOOL Autool BT360 Battery System Tester Now the tester detects the surface charge has been eliminated, turn lights off as prompted, then press OK key. The tester will recover automatic test OUT-OF-VEHICLE means battery is not connected with any of the vehicle loaded, i.e.
  • Page 10 AUTOOL Autool BT360 Battery System Tester When it's IN-VEHICLE test, battery installation way shall also be selected, e.g. TOP, SIDE or REMOTE (This selection is no need for OUT-OF-VEHICLE), then press OK key to confirm. REMOTE is adopted for some in vehicle battery which is too tightly installed to...

  • Page 11: Battery System Standard And Rating

    AUTOOL Autool BT360 Battery System Tester NOTE: For REMOTE test, there will be a little tolerance. For any doubt, take off the battery and select "OUT-OF-VEHICLE" to re-test. 3.4.4 Battery System Standard and Rating BT-360 battery tester will test each battery according to the selected system and rating.
  • Page 12 AUTOOL Autool BT360 Battery System Tester Rating range as following: Measure Standard Measure Range 100-2400 26A17--245H52 100-2200 100-2200 100-2400 100-2400 30-220Ah 100-2400 100-2400 100-2400 Input correct test standard and rating, press OK key, tester starts to test, and dynamic interface "TESTING" prompted. See below:...

  • Page 13: Battery Test Result

    AUTOOL Autool BT360 Battery System Tester It takes around 3 seconds to display the battery test result. 3.4.5 Battery Test Result Battery test result includes 5 types as following: 1) Good Battery SOH:96% SOC:98% 12.64V 490A Rating 500A GOOD BATTERY...
  • Page 14 AUTOOL Autool BT360 Battery System Tester The battery near ly or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed. 4) Bad Cell, Replace SOH:0% SOC:20% 10.60V Rating 500A BAD CELL，REPLACE Battery interior damaged, broken cell or short circuit, replace battery.

  • Page 15: Cranking Test

    AUTOOL Autool BT360 Battery System Tester return to the startup interface. After testing: if it's "IN-VEHICLE" test state, press OK key will bring to Cranking Test. 3.5 Cranking Test Tester prompts as following: Starting the engine as prompted, tester will automatically complete the cranking test and display the result.

  • Page 16: Charging System And Rectifier Diode Test

    AUTOOL Autool BT360 Battery System Tester This is for the convenience of the maintenance personnel to quickly know the whole state of the starting system according to the data. After testing finished, do not shut down the engine, press OK key to enter Charging Test.
  • Page 17 AUTOOL Autool BT360 Battery System Tester ripple test result and charging test result. NOTE: If no increase rotation detected, it shall be the fault of generator regulator or connection with battery failed. Tester will try 3 times to further detect, if still failed, it will skip the increase rotation detect and the test result displays "No Volt Output".

  • Page 18: Chapter 4 Daily Maintenance

    Check the test cable whether break off or drop down. 5. Warranty Service There are 3 years' warranty for AUTOOL product main unit and 1 y ear warranty for the accessories since the day customers have rec eived the product parcel.
  • Page 19 , please refer to the actual product. If you have any question, please contact the dealer or the Autool service center. The company have the final explanation right of product and shall not bear...

Table of Contents

Save PDF