Thank you for purchasing this Clarion product. • Please read this owner’s manual in its entirety before operating this equipment. • After reading this manual, keep it handy, such as in your glove compartment. • Save your sales receipt. The warranty at the end of this manual and your sales receipt are essential for warranty service.
The unit does not work; no lights ... 12 Sound is distorted ... 12 No sound coming from the unit ... 12 7. GLOSSARY ... 13 8. SPECIFICATIONS ... 14 9. LIMITED WARRANTY INFORMATION ... 15 EQS746 EQS746_OwnersManual.pmd 2005-12-02, 16:13...
1. FEATURES The Clarion EQS746 is a 7-band stereo equalizer/crossover specifically created for the mobile environment. The EQS746 provides powerful features in a compact size: • Seven equalization bands (50Hz, 125Hz, 315Hz, 2.2KHz, 6kHz, and 16 kHz), each frequency adjustable from -12 to +12dB (-15 to +15dB for subwoofer frequencies) •...
Do not pour liquid or poke foreign objects into the unit. Water and humidity may damage internal circuitry. • If the unit becomes wet, turn off all power and ask your authorized Clarion dealer to clean or service the unit. Failure to observe these precautions may damage your car, the monitor, or the video source, and may void the warranty.
Equalizer gain controls To adjust gain, rotate control to desired setting Front panel controls Main in Rear out Aux in Rear panel connections AUX gain control: Gain adjustment for left and right auxiliary input Top panel 2005-12-02, 16:13 Sub out EQS746...
Once you set the source unit volume, do not change it. Always use the volume control on the EQS746 as the master (main) volume control. The EQS746 has better electronics, a higher sound to noise ratio, and is more linear than the volume settings on any source unit available.
Setting the low-pass frequency Set the low pass frequency switch on the top of the EQS746 to either 60Hz or 90Hz depending on the subwoofer and subwoofer amplifier requirements. Connecting an MP3 player or video unit 1. Plug the MP3 player or video unit into the auxiliary RCA input on the back of the EQS764 unit.
8 Phillips-head screws Before starting Mounting precautions The EQS746 can be mounted next to the source unit or under the dash using the mounting brackets. The front panel controls should be easily accessible from the driver’s seat. In addition: •...
Extra cable can cause signal loss and act as an antenna for noise. Use only high- quality RCA cables that are no longer than necessary to make a direct connection with the source unit and amplifiers. Mounting diagram EQS746_OwnersManual.pmd EQS746 2005-12-02, 16:13...
Wiring diagram Remote turn-on Chassis ground (bare metal) Front out Front amp/rear amp EQS746 EQS746_OwnersManual.pmd Auxiliary source Source unit POWER PLAY/PAUSE PREVIOUS NEXT Main in Sub out Rear out Aux in 2005-12-02, 16:13 EJECT DISC STOP VIDEO AUDIO CONTROLS SOURCE...
If the problem still occurs, see your autho- rized Clarion dealer. • Speakers may be damaged. Consult your authorized Clarion dealer. No sound coming from the unit • The wrong input is selected. Press the AUX switch to turn the main inputs on.
Radio Corporation of America. Slope : how fast the sound changes rated in dBs. The higher the dB number, the faster the frequency drops off. EQS746 EQS746_OwnersManual.pmd 2005-12-02, 16:13...
5. The sole responsibility of Clarion under this Limited Warranty shall be limited to the repair of the product or replacement of the product, at the sole discretion of Clarion.
Need help?
Do you have a question about the EQS746 and is the answer not in the manual?
Questions and answers