Do you have a question about the Hollywood DC117-36 and is the answer not in the manual?
Questions and answers
chantale marie rose ange Leclerc
January 23, 2025
gow to install wall screwwa
1 comments:
Mr. Anderson
February 10, 2025
The manual does not provide specific instructions for installing wall screws for the FENCHILIN Hollywood DC117-36. However, general installation steps for the vanity mirror include aligning the holes, securing bolts from the bottom of the base to the mirror, and fixing the bracket and mirror. If wall mounting is required, follow standard procedures: mark drill points, drill holes, insert wall anchors, and secure screws properly.
PRODUCT SIZE 3.6cm(1.4") 80cm 70cm(27.5") 58cm 12cm(4.7") CONTAINED ITEMS USB Port for charging the electronic advices, like mobile phone. Connect the power to use LED Mirror lights. Disconnect the power to off LED Mirror lights.
INSTALLATION STEPS INSTALLATION INSTRUCTIONS FOR VANITY MIRROR FOLLOW STEP BY STEP MAKE SURE THE HOLES AND SCREW THE BOLTS FROM THE BOTTOM THE BASE ARE ALLIGNED OF THE BASE TO THE MIRROR SCREW THE BOLTS FROM THE BOTTOM OF THE HOLDER TO THE BACKBOARD FIXED BRACKET FIXED MIRROR...
Page 6
Important Safety Instructions: These instrctions are provided for your safety. It's very important that they are · HOUSE USE ONLY DANGER/WARNINGS: THIS IS NOT A TOY NOT SUITABLE FOR CHILDREN UNDER THE AGE OF 3! PLEASE CAUTION: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU' RE WRONG. KEEP AWAY FROM WATER! ALWAYS UNPLUG SMALL APPLIANCES! CLEANING &...
Need help?
Do you have a question about the Hollywood DC117-36 and is the answer not in the manual?
Questions and answers
gow to install wall screwwa
The manual does not provide specific instructions for installing wall screws for the FENCHILIN Hollywood DC117-36. However, general installation steps for the vanity mirror include aligning the holes, securing bolts from the bottom of the base to the mirror, and fixing the bracket and mirror. If wall mounting is required, follow standard procedures: mark drill points, drill holes, insert wall anchors, and secure screws properly.
This answer is automatically generated