Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Roadragon LTS-3YT
Summary of Contents for Roadragon LTS-3YT
- Page 1 User manual LTS-3YT User Manuel LTS-3YT...
-
Page 2: Table Of Contents
User manual LTS-3YT Content Chapter One: Product Photo..........................3 Chapter two: Product feature..........................4 Chapter three: Technical Parameters........................ 5 3.1 【Parameter】 ..........................5 3.2【4G frequencies in different countries】 ..................5 Chapter 4: Function............................6 4.1 【Basic function】 ......................... 6 4.1.1 Position ........................6 4.1.2 AGPS ........................ -
Page 3: Chapter One: Product Photo
User manual LTS-3YT Chapter One: Product Photo... -
Page 4: Chapter Two: Product Feature
Chapter two: Product feature 1. This product is designed for the applications on container management, it can replace the air vent of the container, which will not affect the integrity of the container, meanwhile for a concealable installation. 2. The standby time is long. If the data upload interval is one packet every 24 or 48 hours and the working time is about 5-10 years, the battery can support different battery capacity to meet different needs of customers. -
Page 5: Chapter Three: Technical Parameters
Chapter three: Technical Parameters 3.1 【Parameter】 Characteristic Description Working Built in Unchangeable Lithium battery Voltage （3.6V，5400～10800mAh） Optional 5400/8100/10800mAh Power Average working current<100mA;Sleep Consuming current<20uA; Communication 4G network: TDD LTE/ FDD LTE 3G network: WCDMA 2G network: GSM/ GPRS GNSS Support GPS、BD Dual mode GPS L1:1575.42MHz,C/A Code BD B1: 1561.098MHz Dimension... -
Page 6: Chapter 4: Function
East/Africa FDD LTE:B1/B3/B5/B7/B8/B20 WCDMA:B1/B5/B8 GSM:B3/B8 North America FDD LTE:B2/B4/B5/B12/B13/B14 WCDMA:B2/B4/B5 Australia/Taiwa FDD LTE:B1/B3/B4/B5/B7/B8/B28 n/Brazil WCDMA:B1/B2/B5/B8 GSM:B2/B3/B5/B8 Chapter 4: Function 4.1 【Basic function】 4.1.1 Position The default setting is the terminal would send one packet each 24 hours, the packet information includes: Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage etc, the upload interval can be configured, the unit is able to work no less than 365 days. -
Page 7: Battery Level Detect
4.1.4 Battery Level Detect The terminal will upload the battery level status together with the location data pack, and display the battery level on the backend so the user could well know the balance battery , and meanwhile display the current transmission time and the balance battery level of the next uploading pack, so the user could have clear view on the terminal status 4.1.5 Intelligent Tracking In case of found the door of the container is stolen or in other emergency cases and the real time... -
Page 8: E-Sim
4.1.9 E-Sim This terminal support E-Sim which could improve the product stability and to prevent the card slot is loosen or the SIM is removed. 4.2【Extention/Optional Functions】 4.2.1 Light Sensor Built in high sensitive light sensor module, it could detect the light changes from dark to light and wake up the terminal to send alarm, this function is for detecting the door open alarm purpose. -
Page 9: Chapter Five: Installation Guide
Chapter Five: Installation Guide 5.1 【Installation diagram】 Green LED： Solid on-Position Blink：LBS Off：Unpositioned Red LED： Light sensor Fast blink：GPRS connecting Slow Blink：GPRS Connected E-SIM Solid on：Module error SIM card slot Battery Switch... -
Page 10: Installation And Debugging
5.2 【Installation and debugging】 5.2.1 SIM card installation Open the top cover of the terminal, insert the prepared SIM card into the SIM cardholder, and then confirm that the SIM card button is well placed. Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number. -
Page 11: Track Mode
5.3.2 Track mode Command format：ZZ,<A>[,T1,T2]# Description：track mode A: A=1, Enter track mode A=0 Exit track mode T1: Set upload interval in track mode， Unit： Seconds T2: Set the continue tracking upload interval， unit: minutes ZZ,1,30,60# enter track model， upload interval is 30 seconds, enter sleep mode after 60 minutes ZZ,0# Exit track mode 5.3.3 Position mode Command format：LBS,A#... -
Page 12: Motion And Static Mode
5.3.5 Motion and static mode Configuration SMS Command MODE,6,T1,T2,A# MS, T1,T2[,A]# T1:Upload interval in motion status , value 5-43200 minutes Set motion and For example: T2: Upload interval in static status, value static mode 1 MODE,6,60,300,1# Indicates 5-43200 minutes or set clock mode, format upload interval motion... - Page 13 set the wake up time is 120 minutes. For example：HX,120#, Track Mode Enter track mode Exit track mode A: A=1, Set upload interval in track mode ，Unit：second value range：5-300 seconds Set the continue tracking upload interval ZZ,<A>[,T1,T2]# ，unit: minutes value range：5-57600 minutes For example：ZZ,1,10,60# enter track model，...
- Page 14 APN:APNAPDemo.com.attz Username: internet Password: internet VPN,APNAPDemo.com.attz# Set APN IP,119.23.233.52,6000,1# Set primary server IP as 119.23.233.52， Port as 6000， communication mode as TCP IP, ip or dns,port,type# IP,www.365qczx.com,6000,0# Set primary server domain name as www.365qczx.com，port as 6000， communication mode as UDP IP2,119.23.233.52,6000,1# Set standby server IP as 119.23.233.52, Port as 6000，...
Need help?
Do you have a question about the LTS-3YT and is the answer not in the manual?
Questions and answers