Attaching And Equipping A Titration Head; Fig. 7 Macro-Titration Head; Fig. 8 Micro-Titration Head - Metrohm 824 Instructions For Use Manual

2.4 Attaching and equipping a titration head

Macro-titration head
6.1458.010
Note about the Macro-titration head
The SGJ14 opening marked by an arrow is bored at a slight angle so that a rod stirrer or an
electrode can be centered in narrow titration vessels.
824 Easy Sample Changer, Installation
Attachment screws
Electrode
Buret tip
Rod stirrer
2.802.0020
SGJ14 Sleeve
6.1236.020
Screw nipple
4.658.0180
SGJ9 Guiding sleeve
6.2709.070
Propeller stirrer
6.1909.020
Fig. 7 Macro-titration
head
2.4 Attaching and equipping a titration head
Micro-titration head
6.1458.020
Fig. 8 Micro-titration head
Only special micro-electrodes
can be used with the micro-
titration head; see list of
accessories, p. 46.
11