Installing Cartridge Group - ABB HT576469 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
8 Disassembly and assembly / 8.7 Installing cartridge group

8.7 Installing cartridge group

TPL65-A32/33/36
TPL69-A32/33
© Copyright 2019 . All rights reserved.
CAUTION
Oil orifice plates
An orifice plate for adjusting the oil pressure is fitted in each of the two
oil inlet channels in the bearing casing. When the cartridge group, the
bearing casing or the turbocharger is fitted to the engine, it must be
ensured that the orifice plates that are specified for the turbocharger
have been installed in the two oil inlet channels.
Check correct installation of oil orifice plates.
u
Fig. 2
Remove cover from oil connection.
u
Secure separate lifting gear to each of two ribs on bearing casing
u
provided for this purpose.
Remove supports (90450) and carefully insert cartridge group.
u
Evenly tighten the three screws (61059) together with Verbus Ripp®
u
washers (61058) to the specified tightening torque (see chapter Table
of tightening torques).
Evenly tighten screw (61059) together with Verbus Ripp® washers
u
(61058) and two nuts (61037) to the specified tightening torque (see
chapter Table of tightening torques).
HZTL2498_EN Rev.D August 2019