Setting the Current Time
If your screen is unresponsive, press and hold [SET] for 20 seconds and try again after you hear it beep.
1. To set the current time, press [SET].
2. The Hour will now be flashing. Using [UP/DOWN], adjust the Hour and press [SET] to
confirm your choice.
3. The Minutes will now be flashing. Using [UP/DOWN], adjust the Minutes and press [SET] to
confirm.
4. An arrow will now be flashing below the Day of the Week. Using [UP/DOWN], adjust the
Day and press [SET] to confirm your choice.
5. Using [UP/DOWN], adjust the VOLUME to 120 (the size of your oil bottle in mL) and press
[SET] to confirm.
6. Using [UP/DOWN], adjust your LEVEL to 120 (the amount of oil in your bottle in mL) and
press [SET] to confirm.
7. Using [UP/DOWN], adjust your MILLILITERS to 1.0mL/hr and press [SET] to confirm.
Setting the Operating Hours
The Penthouse Scent Diffuser allows up to 5 individual Operating Events so you can scent at various
times on different days of the week.
Set the Start Time
1. Press [MODE]. EVENT 1 ON will appear. This represents the On Time for the first operating
event.
2. Press [SET] and the Hour will flash. Press [UP/DOWN] to adjust.
3. Then press [SET] again for the Minutes to flash. Press [UP/DOWN] to adjust.
Note: Operating events are displayed following the 24-hour clock.
Example) 12:00 = 12:00 PM
24:00 = 12:00 AM
Penthouse Scent Diffuser Instructions
Need help?
Do you have a question about the Penthouse and is the answer not in the manual?
Questions and answers
How do I increase my level from 200 ml to 500 ml on my Penthouse Diffuser
To increase the level from 200 mL to 500 mL on your HOTEL COLLECTION Penthouse Diffuser, follow these steps:
1. Press the [SET] button 5 times until you see LEVEL on the display.
2. Use the [UP/DOWN] buttons to adjust the bottle size to 500 mL.
3. Ensure the displayed color changes from Red to Green, indicating the setting has been saved.
4. Press [SET] 2 times to return to the main display.
This will update the diffuser to recognize the new bottle size.
This answer is automatically generated