Summary of Contents for AVANTREK Macrover 100
- Page 1 Avantrek Fat-tire eBike LCD Display User Manual for Macrover 100 Contents Sections: 1. Description (Page 1) Using The Display (Page 2-5 ) Safety Notes (Page 6) Diagnostic and Reference Guide Lists...
- Page 2 1.Description Product name and model Avantrek fat-tire eBike LCD display (Model: LCD-G51) Specifications Working voltage: DC 36V Off voltage: 30.5 ± 1V Electric current: 18A ± 1A Operating temperature: -20℃ ~ 60℃ Storage temperature: -30℃ ~ 70℃ Appearance and size Materials and Color •...
- Page 3 Front view Side view Summary of functions and buttons LCD-G51 can provide a lot of functions for Avantrek Bikers. The indicating contents are as follows: Battery charge level Power assist level Motor RPM level Speed display in MPH ...
-
Page 4: Using The Display
2. Using the display The screen is best explained by a diagram... Just 3 buttons We use just three buttons to both use and adjust the display. These are: MODE, UP, DOWN... - Page 5 Before and during your rides Power On / Off Hold down the MODE button and the display will switch on and light up (if you’ve remembered to switch on your battery first...). Hold down the MODE button again and the display switches off. The display will also switch itself off if there’s been no activity for 5 minutes. Mileage Display When first switched on the display will show the cumulative distance travelled.
- Page 6 Error Codes Information Getting error codes on your Avantrek Bike is not something you want to see. Sometimes an error code could mean a loose wire, or other times a sensor could be damaged. Use the error code chart below to find out what the error on your LCD display means.
-
Page 7: Safety Notes
3. Safety Notes The Avantrek eBike LCD display is only for use with a compatible Avantrek Bike model. Always switch off all power at the main bike battery before disconnecting or reconnecting the LCD display. Take particular care to lineup the male connector plug of the display with the female plug on the bike. Check for the orientation arrows on each part ...
Need help?
Do you have a question about the Macrover 100 and is the answer not in the manual?
Questions and answers