Download
Share
Print this page
Heltec Automation HT-M2808 Owner's Manual
  1. Manuals
  2. Brands
  3. Heltec Automation Manuals
  4. Wireless Router
  5. HT-M2808
  6. Owner's manual

Heltec Automation HT-M2808 Owner's Manual

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
HT-M2808
Indoor LoRaWAN/LongFi Hotspot
After the machine is connected to the network (either by inserting the network cable
before the Helium APP connection, or after configuring the Wi-Fi through the Helium
APP), it will start to update the firmware of the miner and start to synchronize the
warning
blockchain. If the power is cut off at this time, a system error may occur.
Please press and hold the shutdown button to shut down. Direct power failure may
damage the eMMC.

Advertisement

loading
Need help?

Need help?

Do you have a question about the HT-M2808 and is the answer not in the manual?

Questions and answers

Summary of Contents for Heltec Automation HT-M2808

  • Page 1 HT-M2808 Indoor LoRaWAN/LongFi Hotspot After the machine is connected to the network (either by inserting the network cable before the Helium APP connection, or after configuring the Wi-Fi through the Helium APP), it will start to update the firmware of the miner and start to synchronize the warning blockchain.

  • Page 2: Activation Process

    5) Choose your Hotspot and 6) According to your situation, flashes, Bluetooth is turned on connect via Bluetooth choose to use Ethernet or Wi-Fi https://heltec.org Documents Rev 0.2 P 2 / 5 Nov. 2021 © HelTec Automation Limited standard files...
  • Page 3 Blinking: Bockchain synchronizing;  Orange Synchronization Steady on: Blockchain synchronize complete.  Wi-Fi Blue Wi-Fi connection is successful. System White HT-M2808 Linux kernel running. https://heltec.org Documents Rev 0.2 P 3 / 5 Nov. 2021 © HelTec Automation Limited standard files...
  • Page 4 Local diagnostic page introduction Enter the LAN IP address of Heltec Indoor Hotspot in the browser to open the local diagnostic page.  Default user name: HT-M2808  Default password: The last 6 digits of your devices’ Ethernet Mac address, in lowercase.

  • Page 5: Packing List

    Packing List Name Unit Quality Heltec Indoor Hotspot 12V / 3A DC Adapter DC adapter 110/220V power wire SMA LoRa antenna (1.5m shielded wire) https://heltec.org Documents Rev 0.2 P 5 / 5 Nov. 2021 © HelTec Automation Limited standard files...