Advertisement
Quick Links
Advertisement
Summary of Contents for INOW WIFI
- Page 1 INOW WIFI HEATING ELEMENT MANUAL...
-
Page 2: Safety And Warnings
Before you begin installation, setup or operation of the unit, please read all of these instructions carefully. Safety & Warnings Electric Towel Rails must be installed by a licensed electrician in accordance with the current IEE wiring regulations. The product should be permanently fixed and connected to the 220/240 Volt AC mains power supply via a fused spur/cable outlet, and earth bonded . - Page 3 Search “TUYA” in APP store. b. Scan this QR code 2.2 Register and Sign up. Register with your WIFI code to creat your account. 3. How to connect the thermostatic controller with smart phone via WIFI 3.1 Operation on the thermostatic controller...
- Page 4 seconds,coming with a sound “DI”,now it is in pairing stage and follow the below operation. Pairing operation for controller and APP Once the controller is on P1 stage,Follow the operation on the smart phone,you will get the controller to be paired with the APP .
- Page 5 , coming with a sound “DI” ,the controller is now in pairing stage,and repeat the above pairing operation until the pairing work is done successfully. Pls note: While the controller is connecting,the WIFI icon on the controller will be flashing,once it is connected successfully,it will be light up and stop flashing.
- Page 6 4. Operation on the smart phone after connecting the APP successfully Once the controller is connected with the APP successfully,you can operate it from the smart phone for below modes . ON/OFF Regular temperature setting(Not weekly and 24 hours) ...
- Page 7 4.3 BOOST /TIMER mode You can have the MAX working temperature temporarily by pressing BOOST icon on the APP, working in MAX power for 2 hours or 4 hours.After complete working the boost hours,it will come back to previous working mode automatically. Weekly and 24 hours program Following the below instruction, weekly and 24 hours working way will be programmed as you prefered.
- Page 8 (Note: The axis column will be grey color for the time period which you won’t set the temperature and will run in anti-freezing 15 °C automatically,AC is displayed on the screen when it is running in anti-freezing mode)
- Page 9 5. Manually control 5.1 Radiator mode When the icon displays on the screen, you are in radiator mode. In this mode, the element controls the radiator’s internal temperature and heats to a constant set temperature. The internal thermostat measures the temperature of the heating fluid and instructs the element to heat or stop heating according to the temperature set.
-
Page 10: Room Temperature Compensation
The temperature information from the NTC inside the heating rob(measuring the radiator temperature) and the NTC at the main power cable outlet(measuring the room temperature) are used to ensure correct operation of the radiator,regulated by the control unit.If the automatic control system is faulty for whatever reason and the water temperature in the radiator is increasing in an uncontrolled manner,the system has two safety mechanisms to prevent excessive pressure in the radiator.Firstly,the entire system is completed shut down electronically when a water temperature of 95°C is reached. -
Page 11: Technical Specification
Technical specification *Voltage: 220-240VAC * Power:100W-1000W *Insolation Class: I *IP rating: IPX4 *Temperature setting: 30-70°C(radiator temperature). 15-30°C(room temperature) *Boost: 2/4 hours *Thread size: 1/2” *Open window detection *Antifreezing 15°C *WIFI APP...
Need help?
Do you have a question about the WIFI and is the answer not in the manual?
Questions and answers