Multi-Drop Bus/Internal Communications Protocol (Mdb/Icp); Figure 7 - Mdb Opto Isolated Input / Output Circuits Nv9 Mdb Slave - Innovative NV9 Operation Manual

Innovative nv9 bank note validator: user guide
Hide thumbs Also See for NV9:
Table of Contents

Advertisement

NV9 Operations Manual
Benefits:
Proven in the field
Simple and low cost interfacing of transaction peripherals.
High security control of payout peripherals.
Defence against surrogate validator fraud.
S
traightforward integration into host machines.
Remote programm
Open standard for universal use.
For detailed information and full protocol specificatio
Specification ITL (Drawing GA 138), this is available from the ITL website
www.innovative-technology.co.uk.
To help in the software implementation of
Basic applications on re
6.7 MULTI-DROP BUS/INTERNAL COMMUNICATIONS PROTOCO
To use the MDB mode an IF5 interfa
D
IPswitches 3 & 4 must be in the up position to select 'Special' mode on the validator and
the MDB option of the interface firmware loaded into the NV9. (DIPswitch 2 enables a
fast reset on power up).
Th
e Fast Reset option should be set if the NV9 continuously resets the stacker after the
machine is powered on. The Fast Reset option can be enabled via the Validator Manager
Software, or by setting Dipswitch 2 to the ON position.
Note:
Please refer to the Multi-Drop Bus specification for the suggested current drive
circuits available
The NV9 supports the MDB protocol version 1, level 1
For detailed information and full protocol specification please refer to
www.vending.org
MDB d
efines a serial bus interface used in electrically controlled vending machines (see
figure 6). This is a 9600 Baud Master-Slave system where the NV9 banknote validator is a
slave to a master controller. A master ha
peripherals or slaves. The master is defined as the Vending Mac

Figure 7 - MDB Opto Isolated Input / Output circuits NV9 MDB Slave

Copyright Innovative Technology Ltd 2008
ing of transaction peripherals
the SSP, ITL can provide DLL controls and Visual
quest. Please contact
support@innovative-technology.co.uk
ce box must be fitted to the NV9 Validator.
.
s the capability of communicating with 32
n please refer to SSP Interface
L (MDB/ICP)
hine Controller (VMC).
Receive
Transmit
19
GA326-6

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NV9 and is the answer not in the manual?

Questions and answers

Table of Contents