Advertisement
Advertisement
Summary of Contents for Filtertechnik PC9001
-
Page 2: Table Of Contents
50 to 500 mL/min (0.01 to 0.1 gal/min) Flow rate for -21, 3.8 to 45.4 L/min (1 to 12 gal/min) PC9001-71, PC9001-81: 12 to 100 psi Sample pressure Sample temperature 0 to 60 °C (32 to 140 °F) Sample pressure... -
Page 3: General Information
Specification Details Warranty 1 year Certifications CE and FDA Accession No. 9320350-008 Viscosities tested at ambient temperature: 25 °C ±2 degrees; 77 °F ±2 degrees General information In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages resulting from any defect or omission in this manual. - Page 4 This symbol indicates a laser device is used in the equipment. Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12 August of 2005. In conformity with European local and national regulations (EU Directive 2002/98/EC), European electrical equipment users must now return old or end-of-life equipment to the Producer for disposal at no charge to the user.
- Page 8 Figure 5 Cable connections 1 9 to 33 VDC 2 Alarm driver Table 1 Male connector wires—DB15 cable Pin number Color Function White Power input (9 to 33 VDC) Brown Power ground (return) Green Alarm driver Yellow — Gray RS232-RXD (receive data) Pink RS232-TXD (transmit data) Blue...
- Page 9 Table 2 Female connector wires—DB15 cable (continued) Pin number Color Function Pink RS232-TXD (transmit data) Blue — — Orange RS232-GND (signal return) RS485-A (signal A of differential serial driver pair) Black RS485-B (signal B of differential serial driver pair) Violet RS485-SGND (shield ground connection) —...
-
Page 11: Operation
6–14 or 14–21). Operation Configure the instrument 1. Open the PC9001 Configuration Utility. A window opens (Figure 2. Select the communication (COM) port on the computer that is connected to the counter. 3. Change the Node ID setting to the Node ID of the instrument. The default Node ID setting for new instruments is 138. - Page 12 P C 9 0 0 1...
-
Page 13: Data Management
2. Select the Alarms tab. 3. Make changes to these fields: • Standard (ISO, NAS or SAE) • Alarm Direction (Clean to Dirty or Dirty to Clean) • Code Limits (4, 6, 14 or 21 µm) If NAS is selected as the Standard, only the code limits for 6– 14 µm and 14–21 µm will be available. - Page 14 P C 9 0 0 1...
- Page 15 P C 9 0 0 1...
-
Page 17: Troubleshooting
The instrument cannot be calibrated by the user. Contact the manufacturer for instrument calibration. Troubleshooting Error indicator When an error occurs, an exclamation point appears on the main menu of the PC9001 Configuration Utility. 1. Double-click on the exclamation point. A window opens (Figure 11). -
Page 19: Replacement Parts And Accessories
Table 9 To change Filtertechnik codes to ISO codes, delete all of the digits to the right of the decimal point. Do not change the value either up or down. For example, a Filtertechnik code readout of 7.2 is equivalent to an ISO code of 7. - Page 20 Table 9 Filtertechnik 4406 codes and maximum particle counts (continued) Code Counts/mL Code Counts/mL Code Counts/mL Code Counts/mL Code Counts/mL 0.256 2.02 11.6 14.6 17.6 1036 0.272 2.14 11.7 14.7 17.7 1102 0.288 2.26 11.8 14.8 17.8 1168 0.304 2.38 11.9...
- Page 21 Table 9 Filtertechnik 4406 codes and maximum particle counts (continued) Code Counts/mL Code Counts/mL Code Counts/mL Code Counts/mL Code Counts/mL 21.1 11000 23.1 44000 25.1 176000 27.1 706000 – – 21.2 12000 23.2 48000 25.2 192000 27.2 772000 – –...
- Page 22 Particle sized based on the projected area equivalent diameter. Unit 10 Easter Park, Lenton Lane, Nottingham, NG7 2PX, UK Filtertechnik Tel: +44 (0)1159 003550 Fax: +44 (0)115 9705 597 Filtration, Purification & Web: www.filtertechnik.co.uk Email: sales@filtertechnik.co.uk Separation Solutions English 23...
Need help?
Do you have a question about the PC9001 and is the answer not in the manual?
Questions and answers