Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ComfyGo Mobility Go 6011
Summary of Contents for ComfyGo Mobility Go 6011
- Page 1 6011 User Manual / Warranty...
-
Page 2: Table Of Contents
Table of Contents Preface Product Performance Safety Instructions Usage and Operation Battery and Charger System Diagnostics Controller Maintenance Areas Tech Support Warranty Detail video explanation for Usage and Operations please visit our Youtube Channel. Detail information on page 9th. For all your spare parts need, please visit www.ComfyGoMobility.com Don't forget the register your product, detail information on page 23rd. -
Page 3: Preface
Preface Please read the user manual carefully before using this product. - This manual contains the operation, assembly methods, and and simple faults solutions. The manual applies to our model: 6011 - This manual contains wheelchair maintenance information and self checking methods. -
Page 4: Product Performance
1. Product Performance - This series of electric wheelchairs are powered by Li-ion batteries and use DC motors. Users can control direction and adjust speed by using the joystick controls located on the arm. This wheelchair can be used at low speeds, good road conditions and will handle low slope. Performance Parameters and Technical Specs, 6011 Overall size 38”x27”x38”... - Page 5 1. Product Performance Application Range This electric wheelchair is engineered specifically to serve disabled or elderly people weighing less than 120 kg(265 lbs.), intended for use for operation at walking speed, and is suitable for indoor and outdoor. Please do not use this unit on motorways.
-
Page 6: Safety Instructions
2. Safety Instructions 2.1 Main Security Features - Classified based on the type of protection: Against electric shock, Internal power. - Classified based on the type of protection: Against electric shock, Type B application. - Classified based on the degree of inlet liquid protection: IPX3 - Classified based on the safe use of in a flammable anesthetic mix- ture with air or gas mixed with oxygen or nitrous oxide flammable a esthetic gases occurs: Non-AP/APG type. - Page 7 2. Safety Instructions Avoid Riding in These Conditions Unless Accompanied by a Caretaker - Riding in inclement weather such as rain, heavy fog, strong winds, snow, etc. If your wheelchair gets wet, electronic functions may be damaged so please wipe off all water immediately. - Riding in sub optimal conditions such as muddy areas, trails, sand, gravel, etc.
- Page 8 2. Safety Instructions Precautions for Caregivers - Caregivers should confirm that the users’ feet are in the proper posi- tion on the footrest. - Caregivers should make sure the user is in the seat properly and that the user is properly secured - Caregivers should confirm that there are no loose clothing articles that can get tangled by the wheels or drive motor.
- Page 9 - Electric wheelchairs should not be used together in conjunction with any other devices. If you need to connect a device to it, please contact ComfyGO Mobility, so that we may confirm that the wheelchair will not be adversely affected.
-
Page 10: Usage And Operation
3. Usage and Operation Please visit YouTube for detailed Usage and Operations explanation. Simply search "ComfyGo Mobility Lightweight Foldable Electric Wheelchair (Model # 6011)" on YouTube or scan the QR code with your smartphone's camera. www.youtube.com/c/ComfyGO... - Page 11 3. Usage and Operation 3.1 Wheelchair Adjustments Unfolding Your Wheelchair Take out your wheelchair from the packing box and put it on the ground. Push the chair frame apart to left and right, and press two tubes on both sides of the seat base down into the grooves on both sides of the chair-frame.
- Page 12 3. Usage and Operation Install the footplates tray on the upper tube of the left or right of the frame (Picture 6). And then rotate the footplate forward so they can be locked. then unfold the footplate. Package the leg strap on the right and left upper tube, then use the nylon tape (Picture 7).
- Page 13 3. Usage and Operation Folding and Storing of the Wheelchair Put the wheelchair on the ground. Turn off the power. Turn up the footplates and rotate outward 90 degrees. Outward the leg lever holder, rotate to 90 degrees, then pull out the leg lever. (Pic- ture 10 &...
- Page 14 3. Usage and Operation Switching Between Manual Mode and Electric Mode Manual mode: Turn off the power and the wheelchair will be on manual (push or freewheel mode). When using in the freewheel mode make sure for using manual breaks for both wheels. Electric mode: When turning the power on, the wheelchair will be on electric mode, and electromagnetic breaks will be actives.
-
Page 15: Battery And Charger
4. Battery and Charger 4.1 Charger Requirements The charger is used to charge the battery. When the electric wheel- chair is charging, do not attempt to use the wheelchair. Wheelchair must be disconnected from the charger before using. Charger Technical Data - Input voltage: AC 220V (110V) ±10% - Output voltage: 24V/DC - Output current: 2A/4A... - Page 16 4. Battery and Charger Usage of Charger To charge the battery, connect the charger into the Wheelchair’s con- trol socket then connect the charger to a power supply. Follow these steps to complete the charging process: Step 1: Make sure the electric wheelchair is powered off. Step 2: Make sure the controller socket is not blocked.
- Page 17 4. Battery and Charger 4.3 Battery Use and Maintenance - Improper replacement of the battery may cause a danger or explo- sion. Replace the battery only with the same battery type or one rec- ommended by the manufacturer. Please make sure the battery poles are correct.
-
Page 18: System Diagnostics
5. System Diagnostics If the indicator LED lights are blinking, it means the wheelchair has abnormalities. The abnormalities may occur in following parts: motors, brakes, battery, wire connections, etc. Troubleshooting guide is below. For Audio Signal Indication please check the table. - Page 19 5. System Diagnostics Description of LED light The meaning of LED light Explanation & Solution All LED lights are unlit with no The power is off, wheelchair is in Power is poorly contacted. Fuse is sound standby or sleep mode. tripped or burned out.
-
Page 20: Controller
6. Controller 6.1 Controller Panel Battery Power Gauge Power On/Off Button Horn Button Speedometer Speed Deceleration Speed Acceleration Controller 6.2 Controller Use Power Switch Press the power switch button,the screen will light up and the control- ler will be powered on. Press the power switch button,the screen goes out,and the controller is powered off. - Page 21 6. Controller Speed is divided into five sections, in the following ranges: 20%, 40%, 60%, 80%, 100% of the max speed. First gear: 20% of max speed. Fifth gear of speed: 100% of max speed. Horn Button Press the horn button to use the horn. Battery Power Gauge After you turn on the power, the battery power indicator will light up.
-
Page 22: Maintenance Areas
7. Maintenance Areas 7.1 Maintaining Your Wheelchair Maintenance of wheelchair includes general cleaning of the wheel- chair, checking and tightening all nuts and bolts. Checking the wheels and tire pressure. Checking the battery, battery cables, and battery connections. Check the battery charge level. For further maintenance please contact with your dealer. - Page 23 7. Maintenance Areas 7.5 Wheelchair Malfunction and Checking If a malfunction happen while the wheelchair is in use, turn off the power before checking. Symptom: complete loss of power, and all the LED lights on the con- troller panel are off. Check Step: Step 1: Check if the controller’s plug is loose.
-
Page 24: Tech Support
8. Tech Support Please visit https://www.comfygomobility.com/product-registration/ and register your product now! Registering your ComfyGO product allows for extended warranty service if if applicable to your product.You will also receive product updates and important news on our ComfyGO products. (Simply scan QR code with your phone for the Registration Link) - The fastest way to get support, please e-mail to support@ComfyGoMobility.com All warranty and return requests you can visit for getting professional... - Page 25 9.Warranty Policy - Our goal is to ensure that you are delighted with your purchase. - According to our warranty agreement, all new products have a limit- ed warranty. All batteries have a six month warranty. Spare parts have a one year warranty. The limited warranty does not include: labor or device failure due to the owner's misuse or negligence, non-durable components and components subject to normal wear and tear that need replacement from time to time (for example rubber materials,...
- Page 26 www.ComfyGoMobility.com...
Need help?
Do you have a question about the Go 6011 and is the answer not in the manual?
Questions and answers