FuseBox TD1 Instruction Leaflet

TD1 Time Switch
Instruction Leaflet

1 Technical information

Rating (A)
Voltage(V)
IP RATING
Mounting
Torque (switch terminals)
Maximum cable
Memory locations
Power consumption
Display
Minimum setting
Bell function
Contacts
Battery
Ambient temperature
Ambient humidity
Weight
Accuracy
Complies with
IMPORTANT
1b Time Switch must be installed by a qualified electrician in accordance
with the current IET Wiring Regulations BS 7671.
1c Total load must not exceed the rating of the time switch or any additional
limitation.
1d For loads greater than above, we recommend an installation contactor is
used, switched by the TD1 Time Switch.
BUTTON FUNCTIONS
BUTTON
ON LED

D+
H+
M+
RESET
MANUAL
After installation and testing of this product it is essential that the INSTRUCTION LEAFLET is available for reference
VOLTAGE FREE
CONTACTS
DOCTD12021
16A/250V AC resistive load
4A/250V AC inductive load
220-240V 50/60Hz
IP20 EN 60529
35mm top hat din rail
0.8Nm
4mm²
16 ON 16 OFF
7.5VA
LCD
1 minute*
*30s (set ON and OFF time the
same)
1 changeover contact (3,4,5)
Lithium battery, 150H reserve
-10~ +40℃
35~85%RH
150g
≤2sec/day(at25℃)
EN 60730
VOLTAGE FREE CONTACTS
FUNCTION
Illuminates when switching program is on
Program button
Clock /Time button
Day
Hour
Minute
CAUTION This will DELETE ALL settings!
By pressing D+ and H+ for 3sec this will also
delete all settings!
Manual switch for the following settings:
ON, ON AUTO, OFF, AUTO OFF
1a Dimensions
Connections (VOLTAGE FREE CONTACTS)
SUPPLY
L N
LOAD
L N