Summary of Contents for Cornford Roadhouse Series
- Page 1 ROADHOUSE SERIES GUITAR AMPLIFIERS Page 1: Introduction Page 2: Specifications Page 3: Control Operations Page 4: Rear Panel Important Safety Instructions Earthing/Grounding Instructions...
- Page 2 Introduction The Cornford Roadhouse Series of guitar amplifiers are stripped down and simple operate: simple yet very versatile. The Roadhouse 30 Head and 1x12 Combo offer a combination of enough power to cut through a mix but with a power amp design that can...
- Page 3 Specifications (Roadhouse 30 Head and Combo) 30-watt, cathode biased, valve guitar amplifier head and 1 x 12 combo. Output Valves: 2 x EL34 Preamp Valves: 3 x ECC83 (12AX7) Cabinet: 19 mm, lock jointed ply covered in black ‘Lizard’ vinyl with black grille cloth and white piping. Speakers: Celestion ‘Vintage 30’...
- Page 4 Specifications (Roadhouse 50 Head and Combo) 50-watt, fixed biased, valve guitar amplifier head and 2 x 12 combo. Output Valves: 2 x EL34 Preamp Valves: 3 x ECC83 (12AX7) Cabinet: 9 mm, lock jointed ply covered in black ‘Lizard’ vinyl with black grille cloth and white piping. Metal bar type side handles.
- Page 5 Control Operations Input: I megohm impedance. Suitable for guitars with most types of pickup (the amplifier may, in general however, not give good results with the types of pickup associated with acoustic instruments) Gain: This controls the amount of preamp gain and hence level of preamp distortion in the amplifier.
- Page 6 Rear Panel Mains inlet socket: This accommodates a standard IEC mains lead. The mains fuse is contained within a drawer in this socket and should always be replaced with a fuse of exactly the same type and rating to reduce the risk of fire or electric shock. High Tension Fuse Holder: This accommodates the high voltage fuse for the...
- Page 7 Important Safety Instructions WARNING – When using electrical products, basic precautions should be followed, including the following: 1. Read all the instructions before using the product. 2. Do not use this product near water – for example, near a bathtub, wash bowl, kitchen sink, in a wet basement, near a swimming pool or the like.
- Page 8 The CE mark, which is attached to these products means it conforms to EMC Directive (89/69/EEC), CE Mark Directive (93/68/EEC) and Low Voltage Directive (72/23/EEC). VALVES AND FUSES All valves and fuses fitted to a Cornford amplifier are consumable items and, therefore, are not covered under the manufacturer’s guarantee.
Need help?
Do you have a question about the Roadhouse Series and is the answer not in the manual?
Questions and answers