Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SAFE JACK 51M-SJTP
- Page 1 PN: 51102 Model Number: 51M-SJTP PN Instruction : 51002 Safe Jack Stabilizer Instruction Manual...
- Page 2 Top of Jack D, E Jack Standard G, H Jack Base H, I, L...
- Page 3 Unpack the 51M-SJTP, PN: 51102 and ensure that all parts are included: Item Model Number Description A, B 51M-SJTP 51102 4 pieces Stabilizer Legs 51M-CLEVIS 51111 Clevis for Hi-Lift 50C300HCS5Z 51121 1/2-13 x 3 Hex cap screw GR 5 Zinc...
- Page 4 2. Lay your Hi-Lift or Hi-lift style jack down on the ground as it makes it much easier to attach the parts without worrying about it falling over on you. If you have a (97M-UHS) Universal High Lift Stabilizer attached you don’t need to lay it down, just leave it in the baseplate, standing up.
- Page 5 4. Extend leg sections to the appropriate hole. If you have a 48” jack use the hole closest to the foot, 60” use hole furthest from the foot. Slide the bolt through and secure using the provided wing nuts (G, H). The bolt should act as a stop and not actually go through the top section of the legs.
- Page 6 6. Attach the clevis (C) to the jack standard using the provided bale pin (F). 7. Set Jack upright and swing legs forward against the chains. 8. Rotate the bottom section of the legs until the foot rests flat on the ground (as shown on page 2) and the chain is spread evenly per each side of the jack.
- Page 7 Stabilizer Legs to help make your life easier. Here’s a few things we’ve used them for. 51M-SJSL Add our Safe Jack Secure Lifter and Universal Hi Lift Stabilizer for added safety and pulling/lifting power. 51M-SJSL [PN: 51103] 97M-UHS48/60 [PN: 97102 48”, 97103 60”]...
- Page 8 Safe Jack by Bogert Manufacturing Inc. 3606 N. Swallow Ave. Ste 200 Pasco, WA 99301 USA (509) 735-2106 Phone (800) 627-8088 Toll Free (509) 272-0280 Fax www.safejacks.com...
Need help?
Do you have a question about the 51M-SJTP and is the answer not in the manual?
Questions and answers