Related Manuals for MCR Technologies Weigh Shark TLO
Summary of Contents for MCR Technologies Weigh Shark TLO
- Page 1 Truck Load Out Technologies Group, Inc. P.O. Box 1016 Sterling, IL. 61081 815.622.3181 www.weighshark.com sales@weighshark.com 12/17/2018...
- Page 3 Target Weight: 75.25 tons Weight: 75.25 tons Fill Time: 8.5 min CLEAR PRINT ACME Materials (123) 555-1212 6" Mono-Chrome or Color Touch Ticket Printer screen MCR Technologies Group, Inc. P.O. Box 1016 Sterling, IL 61081 Date: REV: Ph. 815-622-3181 Fax. 815-622-0819 Email: mcr@essex1.com...
- Page 4 TLO Setup Guide TLO Integrator Setup for Ethernet 1. Ensure Crossover Cable is installed to TLO Ethernet port Ethernet Crossover Cable 2. Verify IP Address on TLO is 192.168.0.99. If not, it will NOT communicate with the Integrator. On Integrator, scroll up to Truck Load-Out Setup >...
- Page 5 TLO Setup Guide TLO Integrator Setup for RS 485 RS 485 Circuit Board 1. Press I/O 2. Scroll down to Serial Ports > press ENTER 3. Go to RS 485 > press ENTER then press EDIT 4. Press (+) to scroll to MODBUS RTU > press APPLY 5.
- Page 6 TLO Example The following is an example Truck Load out set up. The system will do the following: • Target Weight must be between 5 and 25 tons. • A new Target Weight must be entered after every truck. • The feeder will be shut off .25 tons before the Target Weight is reached.
- Page 7 Truck Load Out (TLO) The TLO software can be configured to work with the scale keypad, external touch screen, external push buttons or a combination of the above. The TLO uses its own accumulator so there is no conflict with any of the 4 main totalizers. Programming Setup at the Belt Scale Integrator Settings for the TLO system can be found at Setup>Truck Load Out Setup menu.
- Page 8 TLO Outputs Any of the 4 digital Outputs can be configured for the following function. Outputs can be configured under I/O>Outputs menu. I/O>Outputs Function Description Truck Output On when loading starts, off when Target weigh is reached. Truck Ready All the requirements are met for the loading to start. Truck Done On when accumulator reaches Target Weight –...
- Page 9 General Purpose Outputs 100mA Sinking Max at 24Vdc* * 100mA Max current draw on all 24Vdc sources combined MCR Technologies Group, Inc. Truck Load Out Control Wiring P.O. Box 1016 Sterling, IL 61081 Date: REV: Ph. 815-622-3181 Fax. 815-622-0819 6/23/05...
- Page 10 TLO Operation with Scale Screen (Weigh Shark integrator) When the TLO system is Enabled there are 2 extra options under the VIEW menu, Truck Total and Trucks. Use the ▲ and ▼ keys to move the cursor to the Truck Total option and press ENTER. This will open the Truck Load out screen. Tr uc k Loadout >Tr uc k I D: ACM E01 Tar get :...
- Page 11 4. When Loading is completed press Clear to complete load. If setting, Clear Truck ID, is set to ON the Truck ID will be cleared. If setting, Auto Clear Target, is set to ON then the Target weight will also be cleared. Tr uc k Loadout >Tr uc k I D: ACM E01 Tar get :...
- Page 12 If Target weight is between the Maximum and Minimum settings then the screen will display “Ready – Press Start to continue”. If setting, Require Truck ID, is set to ON then a Truck ID will be required before load can begin. If setting, Require Input, is set to ON then the input configure as Truck Load Out Enabled must be ON before the load can begin.
- Page 13 Display will now show the loading process. 4. When Loading is completed press Clear to complete load. If setting, Clear Truck ID, is set to ON the Truck ID will be cleared. If setting, Auto Clear Target, is set to ON then the Target weight will also be cleared.
- Page 14 5. Truck Load out is complete; the system is ready for the next truck. 6. Addition Screens show history for the loading.
- Page 15 TLO Truck Summary Screen at scale integrator. Under the VIEW menu of the scale integrator use the ▲ and ▼ keys to move the cursor to the Trucks option and press ENTER. This will open the Trucks Summary screen. Page 1 >Tr uc k s : Tot al W ei ght : 194.