ATTENTION! The device is exclusively used in residential areas where the air temperature does not drop below 5°C. The device can not be operated at temperatures exceeding the permissible range of minimum and maximum >5-35<°C SAFETY RULES It is forbidden to cover the air inlet and outlet grilles in the radiator. Doing so may result in overheating, destruction of the radiator or in the risk of fire.
ELECTRIC HEATER 2 TECHNICAL DATA Model T19 1000W WiFi 500 - 1000 W heating power power split ~230V 50Hz power supply 4,1 kg. weight 380 / 600 / 65 mm dimensions h/w/d Model T19 1500W WiFi 750 - 1500 W heating power power split ~230V 50Hz...
SAFE DISTANCES FROM ELEMENTS (Fig.1) windowsill 92 cm 76 cm 60 cm 30 cm 1000 W 1500 W 2000 W 4 STATIC LEGS INSTALLATION The radiator is equipped with a pair of legs to set the heater on the floor. In order to install them, use the 4 screws (self-tapping screws) to screw the feet to the bottom of the housing.
ELECTRIC HEATER 1 - Use the assembly template to mark the space for the mounting pins. 2 - Drill the holes and install the wall plugs (figure 2 - img. 1) (4 mounting pins with screws are included with the heater) 3 - Screw the wall hanger (figure 2 - img.
Heating mode button / WiFi connection With this button, by pressing once, you can change the heating mode. The appropriate icons will appear on the display: - 50 % , - 100 %. By pressing and holding the button for about 5 seconds, you activate the WiFi connection in the heater.
All work related to cleaning the interior of the heater may only be carried out by an authorized Thermoval service center. Any unauthorized interference, opening, attempts to clean or repair the interior of the device automatically result in the loss of warranty rights.
Need help?
Do you have a question about the T19 1000 WiFi and is the answer not in the manual?
Questions and answers