Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Tech4Pets T4P-WATERUV2
Summary of Contents for Tech4Pets T4P-WATERUV2
- Page 1 Manual Smart Water Fountain with UV Filter (T4P-WATERUV2) PRODUCT SPECIFICATIONS Power USB Cable to USB Adapter Water Capacity Wi-Fi 2.4Ghz only (5Ghz not supported) FOR INDOOR USE ONLY PACKAGE CONTENTS 1 x USB Power Cable 1 x Water Fountain 1 x USB Power Adapter...
- Page 2 GET THE APP QR Code for Downloading Apps HERE REGISTER OR LOGIN TO APP REGISTER account LOGIN existing account...
- Page 3 RECOMMENDED APP SETTINGS...
-
Page 4: Product Diagram
PRODUCT DIAGRAM Water Tank Water Feed and Power Light Reset Button • Tap to dispense water into bowl • Press and HOLD approx 6 seconds to reset device and put into pairing mode Network Light Handle Water Dispenser Water Bowl Filter Compartment... - Page 5 CONNECTING FOUNTAIN TO APP Press and HOLD Reset button on the front of the fountain to put into pairing mode then open the APP If device Water Feeder not found please check Only 2.4G Wi-Fi networks are supported...
-
Page 6: Scroll Down
USING THE FOUNTAIN App Setting Power On / OFF Disinfect Set Timer Water SCROLL DOWN REMOVING FOUNTAIN... -
Page 7: Adding Water
ADDING WATER The APP will send an alert when water is too low No need to power off, Take off the lid just take out the water using the handle tank and cover Add water to the MAX line Put the top cover and put the water tank back NOTE: Do not use hot water... -
Page 8: Cleaning Instructions
CLEANING INSTRUCTIONS It is recommended to change the water once every 3-4 days to prevent poor water quality Remove the water tank Remove the filter and Clean the filter groove cover and clean groove carefully and remove dirt Clean the pump Clean inside of the water When the filter slot is tank and dry outside...
Need help?
Do you have a question about the T4P-WATERUV2 and is the answer not in the manual?
Questions and answers