Remote Controller - CONFORTotal 7K User Manual

〖Remote Controller〗

Display Screen
For setting display
DISPLAY Button
To start or
DISPLAY when
conditioner is in RUNNIG.
Sleep Button
For setting sleep function.
On/Off Button
Press this button to start /
stop air conditioner.
Temp Adjustment
Buttons
Press " ▼ " to decrease
temp. Press " ▲ " to
increase temp.
TURBO Button
To start or stop turbo function
when air conditioner is in
HEAT or COOLING mode.
Timer selection
Button
Press this button to
select timer.
Remarks:
1. Temperature can be set between 16℃~32℃.
2. The function and display of Heat is not available for cooling-only air conditioner.
3. When there is something wrong with the remote controller, please press 'RESET' button and then operate again.
4.HEAT、AUTO function and display are not available for cooling-only type air conditioner.
5.If user want tomake the room air cool or warm quickly ,user can press "turbo" button in cooling or heating mode,air
conditioner will run in power function.If press "turbo" button again, air conditioner will exit power function.
6.The above illustration of remote controller is only for reference, it may be slightly different from the actual product
you selected.
stop
air
Time setting Button
Press "SETTIMER" and "HOUR/MINU"
buttons to set clock and the time of
start / stop the air conditioner.
USER'S MANUAL
Delete all settings, and
reset remote control.
-10-
SWING Button
For changing
blades position
swing or not.
Mode selection Button
For selecting
AUTO HEAT
COOL DRY
SWEEP
Fan speed button
For selecting indoor fan speed .
Auto
High
LOCK Button
Press this button to set or cancel
self-locking button function of
remote controller.
Quiet Button
For the air
operating in low noise.
Reset Button
vertical
and
Medium
Low
conditioner