Attaching The Antenna - Icom IC-T90A Instruction Manual

1
QUICK REFERENCE GUIDE
D Attaching the antenna
Insert the supplied wide band antenna into the antenna con-
nector and screw down the antenna as shown below.
• 50 MHz band adapter
Attach the 50 MHz band antenna adapter before operating on
or receiving the signal below the 50 MHz band. Be sure to
use this 50 MHz band adapter during operation below the
50 MHz band. You can operate on the whole band with this
adapter.
*KEEP the the anttenna top cap
in the safe place when it not
in use.
Hold the base , then screw the
antenna down.
3
50 MHz band
adapter
Detach the top cap*
Attach the 50 MHz
band adapter
for BC
band to 50 MHz band,
through to 800 MHz band
for WFM band
to
800 MHz band
CAUTION!
TRANSMITTING WITHOUT AN ANTENNA MAY DAMAGE
THE TRANSCEIVER.
NEVER HOLD
the anten-
na when carrying the trans-
ceiver.
KEEP
the jack covers at-
tached when the jack is not
in use, to avoid bad con-
tacts from dust and mois-
ture.
NOTE:
Commercially available antennas may increase transceiver
performance. An optional AD-92SMA
is available to connect an external antenna with a
ADAPTER
BNC connector.
ANTENNA CONNECTOR