Subscribe to Our Youtube Channel
Summary of Contents for Eiger Hygiene EG-SDW03
- Page 1 INSTRUCTION MANUAL Please read these instructions carefully and retain for future reference. EG-SDW03...
- Page 2 PACKAGE CONTENTS • Wall Mounted Sanitizer Dispenser • 1 x Installation Template • 4 x Mounting Screws • 4 x Plugs • 2 x Cartridge Keys • Instruction Manual HIGHLIGHTS • No-touch Automatic Sensor • Lockable, Refillable Cartridge • Suitable for Gel or Liquid Sanitizer SPECIFICATIONS •...
- Page 3 IDENTIFYING PARTS 1. Kettle Cover 2. Kettle 3. Outside Shell 4. Viewing Window 5. Nozzle 6. Control Box 7. Bottom Shell...
- Page 4 INSTRUCTIONS FOR USE INSTALLATION STEPS: TILE , DRY WALL, PLASTER • Tape the installation template at the appropriate location on the mounting surface • Drill four (4) holes at marked location • Insert four (4) plastic anchors (supplied) into drilled holes •...
- Page 5 • Remove the sanitizer cartridge and faster the dispenser to the wall with the remaining two (2) screws (supplied) through the bottom holes. Tighten all screws. • Ensure that the raised part of the white plastic is installed on the outside of the black plastic CLEANING &...
- Page 6 SAFETY PRECAUTIONS If There Is No Power: • Check that the batteries are installed correctly • Check that the power switch is on If The Dispenser Doesn’t Work: • Ensure any trapped air has been worked out of the pumping mechanism first. •...
- Page 7 ENVIRONMENTALLY FRIENDLY DISPOSAL IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service.
- Page 8 WARRANTY This Eiger Hygiene Wall Mounted Sanitizer Dispenser comes with a standard 12-month limited warranty against manufacturing defects and faults. Should the product be unboxed with any faulty parts, poor finishing or visible damage, or fail to perform due to a manufacturing defect or poor workmanship, please return it with your proof of purchase (till slip or invoice) to the store of purchase for an exchange, or repair, depending on the store’s returns policy.
Need help?
Do you have a question about the EG-SDW03 and is the answer not in the manual?
Questions and answers