Table of Contents
Advertisement
RKP2415 / RKP2417 / RKP2419
Rev. : 1.0
12.
Start Up
KVM Settings Session
1.
OSD
OSD Menu on screen time
●
default is 10 seconds.
It can be modified from 05 – 99
●
seconds.
2.
Scan
Scan interval from one PC port
●
to next PC port when applying
auto scan, its default is 10
seconds.
It can be modified to 99 sec for
●
maximum.
3.
Change Password
Default password "00000000"
●
8 zeros
Choose "Change Password" in
●
KVM Setting Session.
Key-in the existing password.
●
Enter the New Password.
●
Re-Enter the New Password.
●
Changing Password complete.
●
The steps are shown as next
●
picture:
4.
Console On/OFF
ON – any user can use the
●
console
OFF – user is not allowed to
●
use the console port, unless
password is entered.
Default – OFF, you need to
●
key-in
password.
5.
Escape
When the following screen is
●
appeared, you can press
"ESC" key to escape.
ESC : QUIT
ENTER NEW PASSWORD :
ESC : QUIT ENTER :
RETYPE NEW PASSWORD :
ESC : QUIT ENTER :
COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT ENTER :
COMPLETE
102
P.25
ENTER PASSWORD :
ENTER :
COMPLETE
?SYSTEM 02
User Manual
█
█
█
Advertisement
Table of Contents
