Page 2
WARNING! Read the operating manual carefully before using the Guarda Edge Powercutter. WARNING! The Guarda Edge Powercutter must always be used in conjunction with a vacuum system that can capture the slurry that the saw produces. WARNING! Use only with water and vacuum on full. Refer to start and stop instructions on page 19.
Page 3
Control, maintenance and service of the machine‘s safety cutter if the idling speed is not correctly adjusted! equipment ................7 • Let your Guarda dealer check the power cutter and carry out General safety instructions ..........8 essential adjustments and repairs.
Page 15
Set up option 1 - With Guarda Electric Exhaust Vacuum What is required? A) Guarda Edge Power Cutter C) Pressured Water Supply E) 38mm/1.5” Guarda Slurry Hose* B) Guarda Electric Exhaust Vacuum D) Power Outlet 220V/10A F) 50mm/2” Guarda Exhaust Hose** (Comes with Kevlar connecting hose) *(Max.
Page 16
Set up option 2 - With Guarda Vacuum Generator What is required? A) Guarda Edge Power Cutter C) Pressured Water Supply E) 38mm/1.5” Guarda Slurry Hose* B) Guarda Vacuum Generator D) Guarda Slurry Interceptor F) 50mm/2” Guarda Exhaust Hose** *(Max. length 5m/15ft) **(Max. length 50m/165ft)
Page 17
A) Guarda Edge Powercutter D) Guarda Slurry Interceptor G) Power Outlet 220V/10A or 15A B) 2 or 3 motor electric wet vacuum E) 38mm/1.5” Guarda Slurry Hose* H) 50mm/2“ Vacuum Adapter C) Pressured Water Supply F) 50mm/2” Guarda Exhaust Hose** *(Max.
Page 18
A) Guarda Edge Power Cutter C) Pressured Water Supply E) Power Outlet 220V/10A or 15A B) 2 or 3 motor electric wet vacuum D) 38mm/1.5” Guarda Slurry Hose* *(Max. length 2 motor: 15m/50ft / 3 motor: 20m/65ft) Set up procedure 1) Connect 38mm/1.5”...
Page 19
TEMPERATURE CUT-OFF SWITCH The Guarda Edge Powercutter is equipped with a temperature cut-o switch. This feature is designed to shut o the saw when the hose temperature exceeds 75 degrees celcuis. This could occur if either the water supply or the air ow created by the vacuum is compromised.
Need help?
Do you have a question about the EDGE and is the answer not in the manual?
Questions and answers